Achieva, Intera, Ingenia, Ingneia CX, Ingenia Elition, and Ingenia Ambition MR Systems
by Philips Medical Systems Nederland B.V.
510(k) K193215
Active
Valid until
No expiry
FDA recalls
100 ongoingDocuments
Trust
Unverified
Regulatory status
| Region | Authorization | Number | Date | Status |
|---|---|---|---|---|
| United States | FDA 510(k)SESE | NumberK193215 | Date10 Apr 2020 | StatusActive |
Recalls
-
- Ongoing Z-3308-2026
- Ongoing Z-3311-2026
- Ongoing Z-3310-2026
When exporting diffusion tensor imaging (DTI) scans from a MR system using the Enhanced MR DICOM format, the exports contain incorrect data (diffusion directions). If the Enhanced MR DICOM export is used in conjunction with third-party software for tractography (e.g. for mapping nerve fiber pathways in the brain), the software will not be able to correctly process the DTI data for reconstruction.
-
- Ongoing Z-3239-2026
- Ongoing Z-3238-2026
- Ongoing Z-3243-2026
- Ongoing Z-3241-2026
- Ongoing Z-3237-2026
- Ongoing Z-3233-2026
- Ongoing Z-3236-2026
- Ongoing Z-3232-2026
A software issue will terminate an examination during the image reconstruction process if the scan parameters are manually adjusted such that reconstruction requirements exceed the available system memory.
-
- Ongoing Z-1965-2026
- Ongoing Z-1956-2026
- Ongoing Z-1951-2026
- Ongoing Z-1960-2026
- Ongoing Z-1954-2026
- Ongoing Z-1953-2026
- Ongoing Z-1967-2026
- Ongoing Z-1968-2026
- Ongoing Z-1961-2026
The potential for stiffness value errors when a specific range of image reconstruction parameters is used in combination with Resoundant's algorithm, leading to the reconstruction voxel size settings in the default MRE scan protocol displaying too small.
-
- Ongoing Z-1207-2026
- Ongoing Z-1206-2026
- Ongoing Z-1209-2026
- Ongoing Z-1212-2026
- Ongoing Z-1211-2026
- Ongoing Z-1210-2026
- Ongoing Z-1208-2026
The potential for stiffness value errors when viewing exported MR Elastography (MRE) stiffness maps to viewer Picture Archiving and Communication System (PACS).
-
- Ongoing Z-2204-2025
- Ongoing Z-2210-2025
- Ongoing Z-2212-2025
- Ongoing Z-2201-2025
- Ongoing Z-2207-2025
- Ongoing Z-2205-2025
- Ongoing Z-2211-2025
- Ongoing Z-2208-2025
- Ongoing Z-2209-2025
- Ongoing Z-2206-2025
- Ongoing Z-2200-2025
The potential for component failures in the Gradient Coil of the affected MR systems may act as a heat source with a potential to produce smoke and/or fire.
-
- Ongoing Z-1933-2025
- Ongoing Z-1930-2025
- Ongoing Z-1932-2025
- Ongoing Z-1928-2025
- Ongoing Z-1931-2025
- Ongoing Z-1929-2025
- Ongoing Z-1935-2025
- Ongoing Z-1934-2025
identified an issue where a component failure in the specific Gradient Coil type of affected systems can potentially act as a heat source, with a potential to produce smoke and/or fire. If smoke or a fire occurs, the risk to patients or operators may include inhalation of smoke, burns, and/or asphyxia which may lead to injury or even death. This issue could also lead to property damage.
-
- Ongoing Z-1800-2025
- Ongoing Z-1803-2025
- Ongoing Z-1798-2025
- Ongoing Z-1801-2025
- Ongoing Z-1799-2025
- Ongoing Z-1802-2025
- Ongoing Z-1795-2025
- Ongoing Z-1797-2025
- Ongoing Z-1796-2025
Potential for alignment errors in the cross reference line functionality when reviewing images generated with the MobiView application.
-
- Ongoing Z-1775-2025
- Ongoing Z-1772-2025
- Ongoing Z-1770-2025
- Ongoing Z-1778-2025
- Ongoing Z-1774-2025
- Ongoing Z-1779-2025
- Ongoing Z-1782-2025
- Ongoing Z-1771-2025
- Ongoing Z-1776-2025
- Ongoing Z-1781-2025
- Ongoing Z-1780-2025
- Ongoing Z-1783-2025
- Ongoing Z-1777-2025
- Ongoing Z-1773-2025
The Quadrature Body Coil (QBC) seal adhesive may fail, creating sharp edges that may come in contact with patients. If the QBC seal becomes loose during the scanning process, the risk to the patient may include skin abrasions, bruises, lacerations, hair loss/entanglement, and tissue injury.
-
- Ongoing Z-3204-2024
- Ongoing Z-3193-2024
- Ongoing Z-3198-2024
- Ongoing Z-3199-2024
- Ongoing Z-3205-2024
- Ongoing Z-3202-2024
- Ongoing Z-3196-2024
- Ongoing Z-3200-2024
- Ongoing Z-3203-2024
- Ongoing Z-3194-2024
- Ongoing Z-3201-2024
- Ongoing Z-3195-2024
- Ongoing Z-3197-2024
Integrated Radio Frequency (IRF) Carrier assembly screws may come loose and protrude beyond the surface could cause the screws to interfere with other moving parts, potentially blocking the horizontal tabletop. May lead to delay in diagnosis and/or may include anxiety of a patient is left on the tabletop inside the bore for a longer duration than anticipated. movement.
-
- Ongoing Z-1853-2024
- Ongoing Z-1839-2024
- Ongoing Z-1850-2024
- Ongoing Z-1849-2024
- Ongoing Z-1847-2024
- Ongoing Z-1852-2024
- Ongoing Z-1845-2024
- Ongoing Z-1838-2024
- Ongoing Z-1848-2024
- Ongoing Z-1836-2024
- Ongoing Z-1842-2024
- Ongoing Z-1851-2024
- Ongoing Z-1837-2024
- Ongoing Z-1846-2024
The g-MDU (global Mains Distribution Unit) L3 terminal connection may become loose creating a hotspot that may cause smoke/fire to alarm in the hospital's technical room, resulting in Smoke and/or fire
-
- Ongoing Z-1830-2024
- Ongoing Z-1829-2024
Philips Ingenia Evolution systems with software R5.7.1 may not provide warning for low ventilation setting which may lead to increase in body temperature or burning sensation
-
- Ongoing Z-1583-2024
- Ongoing Z-1586-2024
Patient support table floor plate may be incorrectly installed.
Coverage
- Active
- Expiring
- Withdrawn
- Listed
- Not covered
United States — FDA 510(k) Active
Specification
- 510(k) Number
- FDA Product Code
- LNH
- Device Class
- Class II
- Regulation
- 21 CFR Part 892.1000
- Advisory Committee
- Radiology
- FDA Decision
- SESE Substantially Equivalent
Other devices from Philips Medical Systems Nederland B.V.
See all devices from Philips Medical Systems Nederland B.V. →