# Atellica CH EMPTY2 11538115

> Active: European Union and United States. Medical device record on deviCERTS, compiled from public registries.

- Canonical page: <https://devicerts.com/devices/atellica-ch-empty2-11538115>
- Manufacturer: [Siemens Healthcare Diagnostics Inc.](https://devicerts.com/manufacturers/siemens-healthcare-diagnostics-inc) (United States)
- Device class: Class A (EU IVDR); Class I (US FDA)
- FDA product code: JJE, JGS
- EMDN: W0201010185 CHEMISTRY ANALYSERS - CONSUMABLES
- GMDN: General laboratory assay tray (61298)

## Registrations and authorizations

- **EUDAMED** · CE/IVDR · European Union · Basic UDI-DI 0405686901518VN · UDI-DI 00630414604503 · registered 2026-07-06 · status: Active
- **GUDID** · GUDID listing · United States · UDI-DI 00630414604503 · listed 2021-02-05 · status: Listed (GUDID: in commercial distribution)
- **GUDID** · FDA 510(k) · United States · K151767 · decision 2015-12-11 · decision SESE · status: Active · from GUDID

## Recalls

- Z-2027-2025 · Class II · ongoing · initiated 2025-05-22: Contamination of the diluent by sodium hypochlorite (NaOCl) which may impact calibrator, quality control (QC), and patient results for all assays except for sodium, potassium, and chloride.
- Z-1003-2024 · Class II · ongoing · initiated 2023-12-15 · matched through shared submission K151767, may concern other models: Potential for a negative bias with quality control (QC) and patient sample results when using the Atellica CH Immunoglobulin M\_2 (IgM\_2) reagent.
- Z-0449-2022 · Class II · ongoing · initiated 2021-11-18 · matched through shared submission K151767, may concern other models: (1)Software (SW) versions V1.25.1 and lower may result in TDef (Test Definition) Parameters for Open Channel Assays reverting to Default Value would shift test results by the magnitude of the implemented Assay Correlation factor; (2) On Board Stability (OBS) Not Updating with Manual Change for Open Channel Assays may continue to use the reagent past its expiration date leading to potential erroneous patient sample results
- Z-2026-2021 · Class II · ongoing · initiated 2021-05-13 · matched through shared submission K151767, may concern other models: Valves used on the Atellica CH 930, Atellica IM 1300 and Atellica IM 1600 analyzers may develop a malfunction due to a manufacturing defect and may result in the valve wearing and leaking over time. The leaking is a risk in valves subject to high pressure or high wear and may impact the result accuracy of any assay.
- Z-1870-2021 · Class II · ongoing · initiated 2021-05-04 · matched through shared submission K151767, may concern other models: Photometer Lamp May Reach Saturation Without Flagging Results, may generate erroneously elevated or depressed patient results
- Z-0861-2021 · Class II · terminated · initiated 2020-12-02 · matched through shared submission K151767, may concern other models: Multiple issues in Software v1.23.2 and lower-may lead to the reporting of discrepant patient results
- Z-1797-2020 · Class II · terminated · initiated 2020-02-27 · matched through shared submission K151767, may concern other models: Editing an assay Test Definition and switching to another assay s Test Definition screen without saving the changes using the save button on the screen, may corrupt the settings of the assay s test definition, and Auto-Rerun or Auto-Dilution results may generate a result of Zero (0) for quantitative assays or Negative for qualitative assays if a well of the reagent pack is not calibrated.
- Z-0862-2020 · Class II · terminated · initiated 2019-10-11 · matched through shared submission K151767, may concern other models: On the Atellica CH 930 Analyzer, when scanning barcodes at the module console for Integrated Multisensor Technology (IMT) system fluids (Standard A (Std A) and Standard B (Std B)) for Sodium (Na), Potassium (K), and Chloride (Cl), the system will translate the decimal point separators to commas. This will result in invalid concentration values for the fluids, therefore the system will utilize default nominal values instead of lot specific IMT fluid concentration values for calculation of the calibrations and results for the Na, K, and Cl methods.
- Z-0581-2020 · Class II · terminated · initiated 2019-09-23: Potential for calibration error resulting in QC failures after the calibration run with QC and patient results being 5 times higher.
- Z-0148-2020 · Class II · terminated · initiated 2019-07-30 · matched through shared submission K151767, may concern other models: Atellica CH 930 Analyzer - Erroneous Indices for Hemolysis and Lipemia in Software versions 1.19.2 and below
- Z-0782-2019 · Class II · terminated · initiated 2018-09-26 · matched through shared submission K151767, may concern other models: Multiple Issues Identified in Atellica Solution System Software in V 1.14.2 and lower in: Atellica IM 1300 Analyzer Atellica IM 1600 Analyzer;Atellica CH 930 Analyzer; Atellica Sample Handler Prime
- Z-0194-2019 · Class II · terminated · initiated 2018-06-29: Atellica Solution system software (SW) version 1.13 and lower, five (5) behavioral issues were identified: 1. Reagent Lock may not work as intended with Primary Reagent ReadyPacks and Ancillary Packs when more than one (1) lot of specific Reagent kits are loaded on the analyzer at the same time. 2. Sample barcodes may be incorrectly read 3. The Atellica IM 1300 Analyzer and Atellica IM 1600 Analyzer may not run CEA dilutions at 50x and 100x. The Analyzer may post a Sample Integrity Error when 50x or 100x dilutions are ordered for Carcinoembryonic Antigen (CEA). Dilution factors lower than 50x and neat samples are not affected by this behavior. 4. The Atellica CH 930 Analyzer may continue to display the default reporting units after the reporting units have been changed. 5. The Atellica CH 930 Analyzer may not display results for sample if certain assays are configured to auto-dilute results above or below the assay measuring interval.

## Identity

- Trade name: Atellica CH EMPTY2 [EUDAMED, FDA GUDID (AccessGUDID)]
- Generic name: General laboratory assay tray [FDA GUDID (AccessGUDID)]
- Device name: IVDR\_67\_TTN\_DUB-C\_A\_INST\_EMPTY [EUDAMED]
- Model / Ref / Catalog: 11538115 [EUDAMED, FDA GUDID (AccessGUDID)]; IVDR\_67\_TTN\_DUB-C\_A\_INST\_EMPTY [EUDAMED]

## Identifiers

- Primary DI / UDI-DI: 00630414604503 [EUDAMED, FDA GUDID (AccessGUDID)]
- Basic UDI-DI: 0405686901518VN [EUDAMED]
- Unit of use DI: 00630414297682 [EUDAMED]
- 510(k) Number: K151767 [FDA GUDID (AccessGUDID)]
- FDA product code: JJE [FDA GUDID (AccessGUDID)]
- EMDN code: W0201010185 [EUDAMED]
- GMDN term: General laboratory assay tray (61298) [FDA GUDID (AccessGUDID)]

## Classification

- Device class: Class A [EUDAMED]; Class I [FDA GUDID (AccessGUDID)]
- Regulation number: 862.2160 [FDA GUDID (AccessGUDID)]
- EU registration type: Standard device [EUDAMED]
- EU market of registration: Germany [EUDAMED]
- GUDID distribution status: In Commercial Distribution [FDA GUDID (AccessGUDID)]

## Properties

- Professional testing: Yes [EUDAMED]
- IVD instrument: Yes [EUDAMED]
- Lot / batch number: Yes [FDA GUDID (AccessGUDID)]
- Expiration date: Yes [FDA GUDID (AccessGUDID)]
- Supplied sterile: No [EUDAMED, FDA GUDID (AccessGUDID)]
- Sterilise before use: No [EUDAMED, FDA GUDID (AccessGUDID)]
- Single use: No [FDA GUDID (AccessGUDID)]
- Implantable: No [FDA GUDID (AccessGUDID)]
- Contains latex: No [FDA GUDID (AccessGUDID)]
- Contains human tissues or cells: No [EUDAMED]
- Contains animal tissues or cells: No [EUDAMED]
- Contains substances of microbial origin: No [EUDAMED]
- Reagent: No [EUDAMED]
- IVD kit: No [EUDAMED]
- Self-testing: No [EUDAMED]
- Near-patient testing: No [EUDAMED]
- Companion diagnostics: No [EUDAMED]
- New device: No [EUDAMED]
- Prescription use: No [FDA GUDID (AccessGUDID)]
- Over-the-counter: No [FDA GUDID (AccessGUDID)]
- Convenience kit: No [FDA GUDID (AccessGUDID)]
- Combination product: No [FDA GUDID (AccessGUDID)]
- HCT/P: No [FDA GUDID (AccessGUDID)]
- Premarket exempt: No [FDA GUDID (AccessGUDID)]
- Serial number: No [FDA GUDID (AccessGUDID)]
- Manufacturing date: No [FDA GUDID (AccessGUDID)]

## Source and citation

- Cite as: Atellica CH EMPTY2 11538115, Siemens Healthcare Diagnostics Inc. deviCERTS medical device catalogue. https://devicerts.com/devices/atellica-ch-empty2-11538115 (data as of 2026-11-16).
- Data sources: [FDA GUDID (AccessGUDID)](https://accessgudid.nlm.nih.gov/), [EUDAMED](https://ec.europa.eu/tools/eudamed), [FDA recalls](https://open.fda.gov/apis/device/recall/)
- Registry records last synced: 2026-10-23
- Statuses computed as of: 2026-11-16
- JSON: <https://devicerts.com/devices/atellica-ch-empty2-11538115.json>
- Licence: [CC BY 4.0](https://creativecommons.org/licenses/by/4.0/). The deviCERTS layout and text are licensed under CC BY 4.0. Registry data remain under their source terms: U.S. FDA data (openFDA, AccessGUDID) are U.S. public domain; EUDAMED data are subject to the European Commission reuse terms.
- Attribution: DevicErts, https://devicerts.com/devices/atellica-ch-empty2-11538115
- Compiled by deviCERTS (devicerts.com) from public medical device registries (EUDAMED, European Commission; U.S. FDA via openFDA; AccessGUDID, U.S. National Library of Medicine). deviCERTS is not an official register and gives no regulatory advice: the record in the registry itself prevails.
