Atellica Direct Load 11068008
by Siemens Healthcare Diagnostics Inc.
Ref 11068008Model IVDR_67_TTN_DUB-C_A_INST_DL
Atellica Direct Load 11068008 is a specimen processing instrument IVD (EU IVDR Class A; FDA Class I; FDA product code JJE, Analyzer, Chemistry (Photometric, Discrete), for Clinical Use) made by Siemens Healthcare Diagnostics Inc., registered in EUDAMED on 17 Jul 2026 (Basic UDI-DI 0405686902026V3), cleared under FDA 510(k) K151767 on 11 Dec 2015 and listed in FDA GUDID since 24 Sep 2020 (UDI-DI 00630414002347), active as of 24 Oct 2026. 3 FDA recalls are linked to it.
Active
Valid until
No date given
FDA recalls
5 ongoingTrust
Regulatory status
| Region | Authorization | Number | Date | Status |
|---|---|---|---|---|
| European Union | CE/IVDR EUDAMED | Number0405686902026V3 00630414002347 | Date17 Jul 2026 | StatusActive |
| United States | GUDID listing GUDID | Number00630414002347 | Date24 Sep 2020 | StatusListed |
| United States | FDA 510(k)SESE GUDID | NumberK151767 | Date11 Dec 2015 | StatusActive |
Official records
- EUDAMED public site 0405686902026V3
- AccessGUDID record 00630414002347
- FDA 510(k) database K151767
From the FDA record
- Device description
- Atellica DL MODULE
- MRI safety
- Labeling does not contain MRI Safety Information
- Natural rubber latex
- No latex statement on the label
- Sterility
- Supplied non-sterile
Across registries
- EUDAMED Basic UDI-DI 0405686902026V3 registered 17 Jul 2026 Active
- FDA 510(k) K151767 decided 11 Dec 2015 Active
- FDA GUDID UDI-DI 00630414002347 listed 24 Sep 2020 Listed
Recalls
-
- Ongoing Z-2027-2025
Contamination of the diluent by sodium hypochlorite (NaOCl) which may impact calibrator, quality control (QC), and patient results for all assays except for sodium, potassium, and chloride.
-
- Ongoing Z-1003-2024
Potential for a negative bias with quality control (QC) and patient sample results when using the Atellica CH Immunoglobulin M_2 (IgM_2) reagent.
-
- Ongoing Z-0449-2022
(1)Software (SW) versions V1.25.1 and lower may result in TDef (Test Definition) Parameters for Open Channel Assays reverting to Default Value would shift test results by the magnitude of the implemented Assay Correlation factor; (2) On Board Stability (OBS) Not Updating with Manual Change for Open Channel Assays may continue to use the reagent past its expiration date leading to potential erroneous patient sample results
-
- Ongoing Z-2026-2021
Valves used on the Atellica CH 930, Atellica IM 1300 and Atellica IM 1600 analyzers may develop a malfunction due to a manufacturing defect and may result in the valve wearing and leaking over time. The leaking is a risk in valves subject to high pressure or high wear and may impact the result accuracy of any assay.
-
- Ongoing Z-1870-2021
Photometer Lamp May Reach Saturation Without Flagging Results, may generate erroneously elevated or depressed patient results
-
- Terminated Z-0861-2021
Multiple issues in Software v1.23.2 and lower-may lead to the reporting of discrepant patient results
-
- Terminated Z-1797-2020
Editing an assay Test Definition and switching to another assay s Test Definition screen without saving the changes using the save button on the screen, may corrupt the settings of the assay s test definition, and Auto-Rerun or Auto-Dilution results may generate a result of Zero (0) for quantitative assays or Negative for qualitative assays if a well of the reagent pack is not calibrated.
-
- Terminated Z-0862-2020
On the Atellica CH 930 Analyzer, when scanning barcodes at the module console for Integrated Multisensor Technology (IMT) system fluids (Standard A (Std A) and Standard B (Std B)) for Sodium (Na), Potassium (K), and Chloride (Cl), the system will translate the decimal point separators to commas. This will result in invalid concentration values for the fluids, therefore the system will utilize default nominal values instead of lot specific IMT fluid concentration values for calculation of the calibrations and results for the Na, K, and Cl methods.
-
- Terminated Z-0581-2020
Potential for calibration error resulting in QC failures after the calibration run with QC and patient results being 5 times higher.
-
- Terminated Z-0148-2020
Atellica CH 930 Analyzer - Erroneous Indices for Hemolysis and Lipemia in Software versions 1.19.2 and below
-
- Terminated Z-0782-2019
Multiple Issues Identified in Atellica Solution System Software in V 1.14.2 and lower in: Atellica IM 1300 Analyzer Atellica IM 1600 Analyzer;Atellica CH 930 Analyzer; Atellica Sample Handler Prime
-
- Terminated Z-0194-2019
Atellica Solution system software (SW) version 1.13 and lower, five (5) behavioral issues were identified: 1. Reagent Lock may not work as intended with Primary Reagent ReadyPacks and Ancillary Packs when more than one (1) lot of specific Reagent kits are loaded on the analyzer at the same time. 2. Sample barcodes may be incorrectly read 3. The Atellica IM 1300 Analyzer and Atellica IM 1600 Analyzer may not run CEA dilutions at 50x and 100x. The Analyzer may post a Sample Integrity Error when 50x or 100x dilutions are ordered for Carcinoembryonic Antigen (CEA). Dilution factors lower than 50x and neat samples are not affected by this behavior. 4. The Atellica CH 930 Analyzer may continue to display the default reporting units after the reporting units have been changed. 5. The Atellica CH 930 Analyzer may not display results for sample if certain assays are configured to auto-dilute results above or below the assay measuring interval.
Timeline
- Recall initiated FDA recalls Z-0862-2020
- Recall initiated FDA recalls Z-1797-2020
- Listed FDA GUDID 00630414002347
- Recall initiated FDA recalls Z-0861-2021
- Recall initiated FDA recalls Z-1870-2021
- Recall initiated FDA recalls Z-2026-2021
- Recall initiated FDA recalls Z-0449-2022
- Recall initiated FDA recalls Z-1003-2024
- Recall initiated FDA recalls Z-2027-2025
- Registered EUDAMED 0405686902026V3
Coverage
- Active
- Expiring
- Withdrawn
- Listed
- Not covered
- European Union
- United States
Specification
- Trade name
- Atellica DL EUDAMEDAtellica Direct Load GUDID
- Generic name
- Specimen processing instrument IVD
- Device name
- IVDR_67_TTN_DUB-C_a_inst_dl
- Model / Ref / Catalog
- 11068008, IVDR_67_TTN_DUB-C_A_INST_DL
- Primary DI / UDI-DI
- 00630414002347
- Basic UDI-DI
- 0405686902026V3
- 510(k) Number
- FDA product code
- JJE
- EMDN code
- W0201010180 Chemistry analysers - hardware accessories
- GMDN term
- Specimen processing instrument IVD
- Device class
- Class A EUDAMEDClass I GUDID
- Regulation number
- 862.2160
- EU registration type
- Standard device
- EU market of registration
- Belgium
- GUDID distribution status
- In Commercial Distribution
Truth per registry
| Field | EUDAMED | GUDID |
|---|---|---|
| Device class | Class A | Class I |
Similar devices in this category
Other devices filed under CHEMISTRY ANALYSERS.
- cobas pro B-Gate update kit 08763640001 by HITACHI HIGH-TECH CORPORATION
- ARCHITECT c ACE Assay File 6U82-1A by Sentinel Ch. Srl
- Alinity c ACE Assay File 06U86-1A by Sentinel Ch. Srl
- VersaCell® X3 10793839 by SIEMENS HEALTHCARE DIAGNOSTICS PRODUCTS LTD
- Beckman Coulter CHEMISTRY ANALYZER AU680 B96694 by Beckman Coulter, Inc.
- [AUTOANALYZER] BA200 83200 by BIOSYSTEMS S.A.
- DxC 500 AU Module w/ ISE, DxC 500i C63522 by Beckman Coulter, Inc.
- TruReno TR10006 by BioFynder Limited
- Selectra ProM 6003-439 by VitalScientific B.V.
- Auto-Chemistry Analyzer CS-480 by DIRUI INDUSTRIAL CO., LTD