Atellica Sample Handler Prime 11069001
by Siemens Healthcare Diagnostics Inc.
Ref 11069001Model IVDR_67_TTN_DUB-C_A_INST_Prime
Atellica Sample Handler Prime 11069001 is a specimen processing instrument IVD (EU IVDR Class A; FDA Class I; FDA product code JJE, Analyzer, Chemistry (Photometric, Discrete), for Clinical Use) made by Siemens Healthcare Diagnostics Inc., registered in EUDAMED on 3 Aug 2026 (Basic UDI-DI 0405686902027V5), cleared under FDA 510(k) K161954 on 9 Mar 2017 and listed in FDA GUDID since 24 Sep 2020 (UDI-DI 00630414002439), active as of 23 Oct 2026. 4 FDA recalls are linked to it.
Active
Valid until
No date given
FDA recalls
2 ongoingTrust
Regulatory status
| Region | Authorization | Number | Date | Status |
|---|---|---|---|---|
| European Union | CE/IVDR EUDAMED | Number0405686902027V5 00630414002439 | Date3 Aug 2026 | StatusActive |
| United States | GUDID listing GUDID | Number00630414002439 | Date24 Sep 2020 | StatusListed |
| United States | FDA 510(k)SESE GUDID | NumberK161954 | Date9 Mar 2017 | StatusActive |
Official records
- EUDAMED public site 0405686902027V5
- AccessGUDID record 00630414002439
- FDA 510(k) database K161954
From the FDA record
- Device description
- Atellica SAMPLE HANDLER PRIMARY MODULE
- MRI safety
- Labeling does not contain MRI Safety Information
- Natural rubber latex
- No latex statement on the label
- Sterility
- Supplied non-sterile
Across registries
- EUDAMED Basic UDI-DI 0405686902027V5 registered 3 Aug 2026 Active
- FDA 510(k) K161954 decided 9 Mar 2017 Active
- FDA GUDID UDI-DI 00630414002439 listed 24 Sep 2020 Listed
Recalls
-
- Ongoing Z-0496-2025
A manufacturing defect causes Atellica CH Reaction Ring Cuvette Segments with lot numbers N15 on the packaging or 15 on the underside of the cuvette segment have a potential for imprecision and erroneously depressed or elevated QC and patient results for seven (7) analytes: Ammonia, Acetaminophen, Alanine Aminotransferase (ALT), Hemoglobin A1c, Creatinine Kinase (CK), Cystatin C, and Salicylate.
-
- Ongoing Z-1421-2020
Some lots ending in "17", "18", "19", or higher may have cuvette defects allowing water from the water bath to contaminate the interior of the cuvette, which may falsely elevate or depress sample results.
-
- Terminated Z-1301-2019
There were multiple issues identified in the system software which required an update.
-
- Terminated Z-0783-2019
Multiple Issues Identified in Atellica Solution System Software in V 1.14.2 and lower in: Atellica IM 1300 Analyzer Atellica IM 1600 Analyzer;Atellica CH 930 Analyzer; Atellica Sample Handler Prime
-
- Terminated Z-0190-2019
- Terminated Z-0189-2019
- Terminated Z-0191-2019
Atellica Solution system software (SW) version 1.13 and lower, five (5) behavioral issues were identified: 1. Reagent Lock may not work as intended with Primary Reagent ReadyPacks and Ancillary Packs when more than one (1) lot of specific Reagent kits are loaded on the analyzer at the same time. 2. Sample barcodes may be incorrectly read 3. The Atellica IM 1300 Analyzer and Atellica IM 1600 Analyzer may not run CEA dilutions at 50x and 100x. The Analyzer may post a Sample Integrity Error when 50x or 100x dilutions are ordered for Carcinoembryonic Antigen (CEA). Dilution factors lower than 50x and neat samples are not affected by this behavior. 4. The Atellica CH 930 Analyzer may continue to display the default reporting units after the reporting units have been changed. 5. The Atellica CH 930 Analyzer may not display results for sample if certain assays are configured to auto-dilute results above or below the assay measuring interval.
-
- Terminated Z-1587-2018
When more than one immunoassay analyzer is connected to a single solution system, reporting and conversion factors may not be applied to all analyzers
Timeline
- Recall initiated FDA recalls Z-1587-2018
- Recall initiated FDA recalls Z-0190-2019
- Recall initiated FDA recalls Z-0189-2019
- Recall initiated FDA recalls Z-0191-2019
- Recall initiated FDA recalls Z-0783-2019
- Recall initiated FDA recalls Z-1301-2019
- Recall initiated FDA recalls Z-1421-2020
- Listed FDA GUDID 00630414002439
- Recall initiated FDA recalls Z-0496-2025
- Registered EUDAMED 0405686902027V5
Coverage
- Active
- Expiring
- Withdrawn
- Listed
- Not covered
- European Union
- United States
Specification
- Trade name
- Atellica SH Prime EUDAMEDAtellica Sample Handler Prime GUDID
- Generic name
- Specimen processing instrument IVD
- Device name
- IVDR_67_TTN_DUB-C_A_INST_Prime
- Model / Ref / Catalog
- 11069001, IVDR_67_TTN_DUB-C_A_INST_Prime
- Primary DI / UDI-DI
- 00630414002439
- Basic UDI-DI
- 0405686902027V5
- 510(k) Number
- FDA product code
- JJE
- EMDN code
- W0201010180 Chemistry analysers - hardware accessories
- GMDN term
- Specimen processing instrument IVD
- Device class
- Class A EUDAMEDClass I GUDID
- Regulation number
- 862.2160
- EU registration type
- Standard device
- EU market of registration
- Belgium
- GUDID distribution status
- In Commercial Distribution
Truth per registry
| Field | EUDAMED | GUDID |
|---|---|---|
| Device class | Class A | Class I |
Similar devices in this category
Other devices filed under CHEMISTRY ANALYSERS.
- ARCHITECT c ACE Assay File 6U82-1A by Sentinel Ch. Srl
- Alinity c ACE Assay File 06U86-1A by Sentinel Ch. Srl
- VersaCell® X3 10793839 by SIEMENS HEALTHCARE DIAGNOSTICS PRODUCTS LTD
- cobas pro B-Gate update kit 08763640001 by HITACHI HIGH-TECH CORPORATION
- BT15i BT15i-A-A by Biotecnica Instruments S.r.l.
- Auto Chemistry Analyzer Chemray 380 by Rayto Life and Analytical Sciences Co., Ltd.
- Semi-auto Chemistry Analyzer RT-9200 by Rayto Life and Analytical Sciences Co., Ltd.
- Semi-auto Chemistry Analyzer BS002 by Biobase Biodustry(Shandong) Co.,Ltd.
- Selectra ProS 6003-542 by VitalScientific B.V.
- Pentra C400 Standard 1280241012 by Horiba Abx