# Atellica Sample Handler Prime 11069001

> Active: European Union and United States. Medical device record on deviCERTS, compiled from public registries.

- Canonical page: <https://devicerts.com/devices/atellica-sample-handler-prime-11069001>
- Manufacturer: [Siemens Healthcare Diagnostics Inc.](https://devicerts.com/manufacturers/siemens-healthcare-diagnostics-inc) (United States)
- Device class: Class A (EU IVDR); Class I (US FDA)
- FDA product code: JJE, JGS
- EMDN: W0201010180 CHEMISTRY ANALYSERS - HARDWARE ACCESSORIES
- GMDN: Specimen processing instrument IVD (57871)

## Registrations and authorizations

- **EUDAMED** · CE/IVDR · European Union · Basic UDI-DI 0405686902027V5 · UDI-DI 00630414002439 · registered 2026-08-03 · status: Active
- **GUDID** · GUDID listing · United States · UDI-DI 00630414002439 · listed 2020-09-24 · status: Listed (GUDID: in commercial distribution)
- **GUDID** · FDA 510(k) · United States · K161954 · decision 2017-03-09 · decision SESE · status: Active · from GUDID

## Recalls

- Z-0496-2025 · Class II · ongoing · initiated 2024-10-21: A manufacturing defect causes Atellica CH Reaction Ring Cuvette Segments with lot numbers N15 on the packaging or 15 on the underside of the cuvette segment have a potential for imprecision and erroneously depressed or elevated QC and patient results for seven (7) analytes: Ammonia, Acetaminophen, Alanine Aminotransferase (ALT), Hemoglobin A1c, Creatinine Kinase (CK), Cystatin C, and Salicylate.
- Z-1421-2020 · Class II · ongoing · initiated 2020-01-12 · matched through shared submission K161954, may concern other models: Some lots ending in "17", "18", "19", or higher may have cuvette defects allowing water from the water bath to contaminate the interior of the cuvette, which may falsely elevate or depress sample results.
- Z-1301-2019 · Class II · terminated · initiated 2019-03-07 · matched through shared submission K161954, may concern other models: There were multiple issues identified in the system software which required an update.
- Z-0783-2019 · Class II · terminated · initiated 2018-09-26 · matched through shared submission K161954, may concern other models: Multiple Issues Identified in Atellica Solution System Software in V 1.14.2 and lower in: Atellica IM 1300 Analyzer Atellica IM 1600 Analyzer;Atellica CH 930 Analyzer; Atellica Sample Handler Prime
- Z-0190-2019 · Class II · terminated · initiated 2018-06-29: Atellica Solution system software (SW) version 1.13 and lower, five (5) behavioral issues were identified: 1. Reagent Lock may not work as intended with Primary Reagent ReadyPacks and Ancillary Packs when more than one (1) lot of specific Reagent kits are loaded on the analyzer at the same time. 2. Sample barcodes may be incorrectly read 3. The Atellica IM 1300 Analyzer and Atellica IM 1600 Analyzer may not run CEA dilutions at 50x and 100x. The Analyzer may post a Sample Integrity Error when 50x or 100x dilutions are ordered for Carcinoembryonic Antigen (CEA). Dilution factors lower than 50x and neat samples are not affected by this behavior. 4. The Atellica CH 930 Analyzer may continue to display the default reporting units after the reporting units have been changed. 5. The Atellica CH 930 Analyzer may not display results for sample if certain assays are configured to auto-dilute results above or below the assay measuring interval.
- Z-0189-2019 · Class II · terminated · initiated 2018-06-29: Atellica Solution system software (SW) version 1.13 and lower, five (5) behavioral issues were identified: 1. Reagent Lock may not work as intended with Primary Reagent ReadyPacks and Ancillary Packs when more than one (1) lot of specific Reagent kits are loaded on the analyzer at the same time. 2. Sample barcodes may be incorrectly read 3. The Atellica IM 1300 Analyzer and Atellica IM 1600 Analyzer may not run CEA dilutions at 50x and 100x. The Analyzer may post a Sample Integrity Error when 50x or 100x dilutions are ordered for Carcinoembryonic Antigen (CEA). Dilution factors lower than 50x and neat samples are not affected by this behavior. 4. The Atellica CH 930 Analyzer may continue to display the default reporting units after the reporting units have been changed. 5. The Atellica CH 930 Analyzer may not display results for sample if certain assays are configured to auto-dilute results above or below the assay measuring interval.
- Z-0191-2019 · Class II · terminated · initiated 2018-06-29: Atellica Solution system software (SW) version 1.13 and lower, five (5) behavioral issues were identified: 1. Reagent Lock may not work as intended with Primary Reagent ReadyPacks and Ancillary Packs when more than one (1) lot of specific Reagent kits are loaded on the analyzer at the same time. 2. Sample barcodes may be incorrectly read 3. The Atellica IM 1300 Analyzer and Atellica IM 1600 Analyzer may not run CEA dilutions at 50x and 100x. The Analyzer may post a Sample Integrity Error when 50x or 100x dilutions are ordered for Carcinoembryonic Antigen (CEA). Dilution factors lower than 50x and neat samples are not affected by this behavior. 4. The Atellica CH 930 Analyzer may continue to display the default reporting units after the reporting units have been changed. 5. The Atellica CH 930 Analyzer may not display results for sample if certain assays are configured to auto-dilute results above or below the assay measuring interval.
- Z-1587-2018 · Class II · terminated · initiated 2018-02-26 · matched through shared submission K161954, may concern other models: When more than one immunoassay analyzer is connected to a single solution system, reporting and conversion factors may not be applied to all analyzers

## Identity

- Trade name: Atellica SH Prime [EUDAMED]; Atellica Sample Handler Prime [FDA GUDID (AccessGUDID)]
- Generic name: Specimen processing instrument IVD [FDA GUDID (AccessGUDID)]
- Device name: IVDR\_67\_TTN\_DUB-C\_A\_INST\_Prime [EUDAMED]
- Model / Ref / Catalog: 11069001 [EUDAMED, FDA GUDID (AccessGUDID)]; IVDR\_67\_TTN\_DUB-C\_A\_INST\_Prime [EUDAMED]

## Identifiers

- Primary DI / UDI-DI: 00630414002439 [EUDAMED, FDA GUDID (AccessGUDID)]
- Basic UDI-DI: 0405686902027V5 [EUDAMED]
- 510(k) Number: K161954 [FDA GUDID (AccessGUDID)]
- FDA product code: JJE [FDA GUDID (AccessGUDID)]
- EMDN code: W0201010180 [EUDAMED]
- GMDN term: Specimen processing instrument IVD (57871) [FDA GUDID (AccessGUDID)]

## Classification

- Device class: Class A [EUDAMED]; Class I [FDA GUDID (AccessGUDID)]
- Regulation number: 862.2160 [FDA GUDID (AccessGUDID)]
- EU registration type: Standard device [EUDAMED]
- EU market of registration: Belgium [EUDAMED]
- GUDID distribution status: In Commercial Distribution [FDA GUDID (AccessGUDID)]

## Properties

- Professional testing: Yes [EUDAMED]
- IVD instrument: Yes [EUDAMED]
- Serial number: Yes [FDA GUDID (AccessGUDID)]
- Supplied sterile: No [EUDAMED, FDA GUDID (AccessGUDID)]
- Sterilise before use: No [EUDAMED, FDA GUDID (AccessGUDID)]
- Single use: No [FDA GUDID (AccessGUDID)]
- Implantable: No [FDA GUDID (AccessGUDID)]
- Contains latex: No [FDA GUDID (AccessGUDID)]
- Contains human tissues or cells: No [EUDAMED]
- Contains animal tissues or cells: No [EUDAMED]
- Contains substances of microbial origin: No [EUDAMED]
- Reagent: No [EUDAMED]
- IVD kit: No [EUDAMED]
- Self-testing: No [EUDAMED]
- Near-patient testing: No [EUDAMED]
- Companion diagnostics: No [EUDAMED]
- New device: No [EUDAMED]
- Prescription use: No [FDA GUDID (AccessGUDID)]
- Over-the-counter: No [FDA GUDID (AccessGUDID)]
- Convenience kit: No [FDA GUDID (AccessGUDID)]
- Combination product: No [FDA GUDID (AccessGUDID)]
- HCT/P: No [FDA GUDID (AccessGUDID)]
- Premarket exempt: No [FDA GUDID (AccessGUDID)]
- Lot / batch number: No [FDA GUDID (AccessGUDID)]
- Expiration date: No [FDA GUDID (AccessGUDID)]
- Manufacturing date: No [FDA GUDID (AccessGUDID)]

## Source and citation

- Cite as: Atellica Sample Handler Prime 11069001, Siemens Healthcare Diagnostics Inc. deviCERTS medical device catalogue. https://devicerts.com/devices/atellica-sample-handler-prime-11069001 (data as of 2026-11-18).
- Data sources: [FDA GUDID (AccessGUDID)](https://accessgudid.nlm.nih.gov/), [EUDAMED](https://ec.europa.eu/tools/eudamed), [FDA recalls](https://open.fda.gov/apis/device/recall/)
- Registry records last synced: 2026-10-23
- Statuses computed as of: 2026-11-18
- JSON: <https://devicerts.com/devices/atellica-sample-handler-prime-11069001.json>
- Licence: [CC BY 4.0](https://creativecommons.org/licenses/by/4.0/). The deviCERTS layout and text are licensed under CC BY 4.0. Registry data remain under their source terms: U.S. FDA data (openFDA, AccessGUDID) are U.S. public domain; EUDAMED data are subject to the European Commission reuse terms.
- Attribution: DevicErts, https://devicerts.com/devices/atellica-sample-handler-prime-11069001
- Compiled by deviCERTS (devicerts.com) from public medical device registries (EUDAMED, European Commission; U.S. FDA via openFDA; AccessGUDID, U.S. National Library of Medicine). deviCERTS is not an official register and gives no regulatory advice: the record in the registry itself prevails.
