N/A Sp-1711
by Biomet Microfixation, Inc GUDID
Listed (no authorization)
Regulatory status
| Region | Authorization | Number | Date | Status |
|---|---|---|---|---|
| United States | GUDID listing | Number00841036282325 | Date27 Mar 2020 | StatusIn distribution |
Coverage
- Active
- Expiring
- Withdrawn
- Listed
- Not known
- Not covered
United States — GUDID listing Listed
Recalls
-
- Terminated Z-1220-2017
The identification of the devices was non-conforming with off-centered slots and the no-go gage starting in the pilot hole.
-
- Terminated Z-0137-2016
- Terminated Z-0136-2016
The lids on implant caddies within P/N 17-5000 and 19-5000 could not be opened by the user without application of undesirable/unexpected excessive force.
-
- Terminated Z-0836-2012
- Terminated Z-0835-2012
On 11/08/2010 Biomet Microfixation, Jacksonville, FL initiated a recall of the Biomet 1 count (REF 91-1504, Lot 622120) and 5 count (REF 95-1504, Lot 622120) packages of 1.5MM System High Torque (HT) Cross-Drive Screw 5/Pk and the Biomet 1 count (REF 99-7204, Lot 202450) and 5 count packages (REF 01/7204, Lot 202450) of the 1.5MM System Center-Drive Screw, 5/Pk because of a possibility that thes
-
- Terminated Z-2385-2011
Biomet Microfixation, Jacksonville, FL is recalling their 1.5 6 Hole Reg Double Y, Lots 785710, 753120, 693500 and 733600. This product is labeled as 01-7110-K (1.5 6 Hole Reg Double Y), however the package contains a 01-7112-K (1.5.6 Hold Long Double Y).
-
- Terminated Z-2873-2011
On May 17, 2010, Biomet Microfixation issued a Safety Alert on their Thinflap System Cross Drive, Self Drilling Screw, 1.5x4mm, Model #: 91-6704, Lot#: 173770. The product is labeled incorrectly. Some packages of 91-6704 lot 173770 are labeled as cross drive screws, but contain center drive screws. All affected customers were notified of the recall on May 17, 2010.
-
- Terminated Z-1286-2012
On 4/26/10 Biomet Microfixation, Jacksonville, FL initiated a recall of their 1.5 3/3 hole 100 degree left X-long L plate, Model #01-7036, Lot #193690. Product is labeled incorrectly.
-
- Terminated Z-2206-2010
Biomet Microfixation has received a complaint from a customer who reports finding a 3.5mm length screw in one 5 pack of 4mm length screws.
-
- Terminated Z-1151-2010
Biomet Microfixation is recalling Model 01-7293 an Model 99-7293-01, 1.5X3.5mm Self Drilling, Low Profile, Cross Drive screw, 5/PK was found to contain a 91-6104 (1.5X4mm High Torque, Self Drilling, Cross Drive screw.
-
- Terminated Z-1943-2010
Biomet Microfixation is recalling 91-6103 1.5x3.5mm HT SD X-drive screw Lot Number 829760. This package may contain 91-6704 1.5x4mm ThinFlap SD X-drive screw.
Specification
- Trade Name
- N/A
- Generic Name
- Craniofacial fixation plate, non-bioabsorbable, non-customized
- Model / Ref / Catalog
- SP-1711
- Primary DI / UDI-DI
- 00841036282325
- FDA Product Code
- HBW, GWO, GXR, JEY
- GMDN Term
- Craniofacial fixation plate, non-bioabsorbable, non-customized
- Device Class
- Class II
- Regulation Number
- 882.5360, 882.5320, 882.5250, 872.4760
- Commercial Distribution
- In Commercial Distribution
- Sterilization Method
- Moist Heat or Steam Sterilization
Other devices from Biomet Microfixation, Inc
Properties
Other properties (10)
- Sterile: No
- Contains Latex: No
- Over-the-Counter: No
- Convenience Kit: No
- Combination Product: No
- HCT/P: No
- Premarket Exempt: No
- Serial Number: No
- Expiration Date: No
- Manufacturing Date: No