Skip to content

Pennig Minifixator 1

by Orthofix SRL 8 variants

Pennig Minifixator 1 (M420) is an intravascular occluding balloon catheter (FDA Class II; FDA product code JDW, Pin, Fixation, Threaded) made by Orthofix SRL, cleared under FDA 510(k) K955848 on 20 Mar 1996 and listed in FDA GUDID since 16 Sep 2016 (UDI-DI 18032568867152), active as of 12 Nov 2026. 23 FDA recalls are linked to it.

Active United States. Also listed in GUDID (US).

510(k)

Valid until

No expiry

510(k) clearance is not time-limited

FDA recalls

None ongoing

23 closed

Documents

510(k) K955848

FDA submission, from GUDID

Trust

Unverified

Source GUDID, synced 12 Nov 2026.

Regulatory status

as of registry sync 12 Nov 2026

RegionAuthorizationNumberDateStatus
United StatesGUDID listing Number18032568867152 UDI-DI Date16 Sep 2016ListedStatusListed GUDID: in commercial distribution
United StatesFDA 510(k)SESE from GUDID Substantially Equivalent · Traditional NumberK955848 Date20 Mar 1996DecidedStatusActive

Official records

From the FDA record

Device description
PMF, THREADED WIRES, D 1.6 MM LENGTH 70/15 MM (PACK OF 4)
MRI safety
Labeling does not contain MRI Safety Information
Natural rubber latex
No latex statement on the label
Sterility
Supplied non-sterile; sterilise before use (Moist Heat or Steam Sterilization)

From the GUDID record (AccessGUDID), as read on 12 Nov 2026, as the labeller entered it.

Across registries

2 registries list this device

  • FDA 510(k) K955848 decided 20 Mar 1996 Active
  • FDA GUDID UDI-DI 18032568867152 listed 16 Sep 2016 Listed

Recalls

23 recalls · FDA

  • 21 recalls, same reason

    • Terminated Z-0390-2020 FDA Class II initiated 27 Sep 2018
    • Terminated Z-0375-2020 FDA Class II initiated 27 Sep 2018
    • Terminated Z-0382-2020 FDA Class II initiated 27 Sep 2018
    • Terminated Z-0383-2020 FDA Class II initiated 27 Sep 2018
    • Terminated Z-0374-2020 FDA Class II initiated 27 Sep 2018
    • Terminated Z-0373-2020 FDA Class II initiated 27 Sep 2018
    • Terminated Z-0393-2020 FDA Class II initiated 27 Sep 2018
    • Terminated Z-0379-2020 FDA Class II initiated 27 Sep 2018
    • Terminated Z-0391-2020 FDA Class II initiated 27 Sep 2018
    • Terminated Z-0384-2020 FDA Class II initiated 27 Sep 2018
    • Terminated Z-0381-2020 FDA Class II initiated 27 Sep 2018
    • Terminated Z-0392-2020 FDA Class II initiated 27 Sep 2018
    • Terminated Z-0377-2020 FDA Class II initiated 27 Sep 2018
    • Terminated Z-0378-2020 FDA Class II initiated 27 Sep 2018
    • Terminated Z-0387-2020 FDA Class II initiated 27 Sep 2018
    • Terminated Z-0386-2020 FDA Class II initiated 27 Sep 2018
    • Terminated Z-0385-2020 FDA Class II initiated 27 Sep 2018
    • Terminated Z-0376-2020 FDA Class II initiated 27 Sep 2018
    • Terminated Z-0380-2020 FDA Class II initiated 27 Sep 2018
    • Terminated Z-0388-2020 FDA Class II initiated 27 Sep 2018
    • Terminated Z-0389-2020 FDA Class II initiated 27 Sep 2018

    As a result of complaint investigations it was determined that batches of drill bits have a geometrical detail that does not correspond to the intended design. This could result in lower cutting performance.

  • 2 recalls, same reason

    • Terminated Z-1435-2010 FDA Unclassified (pre-2012) initiated 22 Feb 2010
    • Terminated Z-1434-2010 FDA Unclassified (pre-2012) initiated 22 Feb 2010

    During standard quality controls, firm identified a potential for breakage of the XCaliber clamp when locking the cam.

Timeline

25 dated events

  1. Recall initiated FDA recalls Z-0392-2020
  2. Recall initiated FDA recalls Z-0377-2020
  3. Recall initiated FDA recalls Z-0378-2020
  4. Recall initiated FDA recalls Z-0387-2020
  5. Recall initiated FDA recalls Z-0386-2020
  6. Recall initiated FDA recalls Z-0385-2020
  7. Recall initiated FDA recalls Z-0376-2020
  8. Recall initiated FDA recalls Z-0380-2020
  9. Recall initiated FDA recalls Z-0388-2020
  10. Recall initiated FDA recalls Z-0389-2020

15 earlier events are in the sections above.

Coverage

1 jurisdiction

United States of America
  • Active
  • Expiring
  • Withdrawn
  • Listed
  • Not covered

United States — FDA 510(k) Active

Specification

GUDID

Trade name
Pennig Minifixator
Generic name
Intravascular occluding balloon catheter, image-guided
Model / Ref / Catalog
1, M420
Description
PMF, THREADED WIRES, D 1.6 MM LENGTH 70/15 MM (PACK OF 4)
Primary DI / UDI-DI
18032568867152
510(k) Number
FDA product code
JDW
GMDN term
Intravascular occluding balloon catheter, image-guided
Device class
Class II
Regulation number
888.3040
GUDID distribution status
In Commercial Distribution
Sterilisation method
Moist Heat or Steam Sterilization
Size
Length — 70 Millimeter
Outer Diameter — 1.6 Millimeter

Similar devices in this category

Other devices filed under Intravascular occluding balloon catheter, image-guided.

Other devices from Orthofix SRL

See all devices from Orthofix SRL →

Properties

  • Sterilise before use
  • Single use
  • Prescription use
  • Lot / batch number
  • Serial number
  • Manufacturing date
Other properties (9, all answered No)