# SIGNAPioneer

> Active: United States. Medical device record on deviCERTS, compiled from public registries.

- Canonical page: <https://devicerts.com/devices/signapioneer-lnh>
- Manufacturer: [GE Healthcare](https://devicerts.com/manufacturers/ge-healthcare) (United States)
- Device class: Class II (US FDA)
- FDA product code: LNH

## Registrations and authorizations

- **510(k)** · FDA 510(k) · United States · K160621 · decision 2016-03-29 · decision SESE · status: Active

## Recalls

- Z-2460-2024 · Class II · ongoing · initiated 2024-06-14: GE HealthCare has become aware that for certain MR systems, the system predicted B1+RMS value can exceed the B1+RMS user prescribed limit when scanning in Low SAR Mode and the following two conditions are met: 1. 2D FSE T2 FLAIR OR T2 FLAIR Propeller imaging sequence is selected, AND 2. the Optimized T2 FLAIR sequence option is turned off OR not included in the MR configuration. If this occurs, it can result in overheating of an MR conditional implant.
- Z-0592-2022 · Class II · ongoing · initiated 2021-12-23: The magnetic resonance systems could potentially have a cryogen ventilation system that does not meet the venting requirements.
- Z-0134-2022 · Class II · terminated · initiated 2021-08-26: Under certain conditions, some slices may be missing which can lead to a gap of anatomy in the 3D Volume images.
- Z-2054-2021 · Class II · ongoing · initiated 2021-06-04: GE Healthcare has recently become aware of an issue on the affected products listed below where the "Patient Orientation" button may inadvertently be clicked when intending to click on the "Save RX" button. This changes the prescribed patient orientation on the system prior to running the initial 3-Plane Localizer Scan (See Figure 1 for reference to buttons.) Selecting and saving a patient orientation that does not match the patient's actual position may result in incorrectly annotated and/or flipped images.
- Z-0876-2020 · Class II · terminated · initiated 2019-12-23: It was identified that due to a potential installation workflow issue, the MR system date could be set incorrectly. The system's date and time setting are used to populate the DICOM header information on images. This could result is an inaccurate date recorded on the images.

## Identifiers

- 510(k) Number: K160621 [FDA 510(k)]
- FDA product code: LNH [FDA 510(k)]

## Classification

- Device class: Class II [FDA 510(k)]
- Regulation: 21 CFR Part 892.1000 [FDA 510(k)]
- Advisory committee: Radiology [FDA 510(k)]
- FDA decision: SESE [FDA 510(k)]

## Source and citation

- Cite as: SIGNAPioneer, GE Healthcare. deviCERTS medical device catalogue. https://devicerts.com/devices/signapioneer-lnh (data as of 2026-11-21).
- Data sources: [FDA 510(k)](https://open.fda.gov/apis/device/510k/), [FDA recalls](https://open.fda.gov/apis/device/recall/)
- Registry records last synced: 2026-10-22
- Statuses computed as of: 2026-11-21
- JSON: <https://devicerts.com/devices/signapioneer-lnh.json>
- Licence: [CC BY 4.0](https://creativecommons.org/licenses/by/4.0/). The deviCERTS layout and text are licensed under CC BY 4.0. Registry data remain under their source terms: U.S. FDA data (openFDA, AccessGUDID) are U.S. public domain; EUDAMED data are subject to the European Commission reuse terms.
- Attribution: DevicErts, https://devicerts.com/devices/signapioneer-lnh
- Compiled by deviCERTS (devicerts.com) from public medical device registries (EUDAMED, European Commission; U.S. FDA via openFDA; AccessGUDID, U.S. National Library of Medicine). deviCERTS is not an official register and gives no regulatory advice: the record in the registry itself prevails.
