# Imacor, Inc.

> Medical device manufacturer record on deviCERTS, compiled from public registries. Imacor, Inc. is a medical device manufacturer, with 7 devices listed in FDA 510(k) and FDA GUDID (FDA Class II) and 2 FDA recalls as of 21 Nov 2026.

- Canonical page: <https://devicerts.com/manufacturers/imacor-inc>
- Also registered as: Imacor, LLC
- Country: United States (FDA applicant, unverified)
- Role: Manufacturer
- DUNS: 604116553

## Figures

- Devices: 7
- FDA recalls (matched to the firm by name): 2, 2 ongoing

## Registry facts

*Every device of the manufacturer. A device listed in two registries counts in both.*

- Registries: FDA 510(k) 4, FDA GUDID 3
- Device classes: FDA Class II 7

## Devices

The first 7 of 7, in the order of the canonical page, which lists them all.

- [ImaCor ZHH](https://devicerts.com/devices/imacor-zhh) · Class II · GUDID · status: Listed
- [ClariTEE](https://devicerts.com/devices/claritee-clt-010) · Class II · GUDID · status: Active · open recall
- [ImaCor Inc. EVO 1](https://devicerts.com/devices/imacor-inc-evo-1) · Class II · GUDID · status: Listed
- [Imacor Zura Evo Imaging System](https://devicerts.com/devices/imacor-zura-evo-imaging-system-iyo) · ref K142054 · Class II · 510(k) · status: Active · decision 2014-09-29 · open recall
- [Zura Tee System With Claritee Probe](https://devicerts.com/devices/zura-tee-system-with-claritee-probe-iyn) · ref K100989 · Class II · 510(k) · status: Active · decision 2010-06-25 · open recall
- [Zura Tee System](https://devicerts.com/devices/zura-tee-system-iyo) · ref K080223 · Class II · 510(k) · status: Active · decision 2008-06-24 · open recall
- [ImaCor Zura Handheld ZHH-010](https://devicerts.com/devices/imacor-zura-handheld-zhh-010-iyn) · ref K220490 · Class II · 510(k) · status: Active · decision 2022-04-08 · open recall

## FDA recalls (matched by name, newest first)

- Z-0038-2026 · Class II · Ongoing · initiated 2025-08-29 · product code ITX: Production assembly error resulting in the potential for reversed articulation, where moving the lever forward caused the probe tip to anteflex rather than retroflex, and vice versa.
- Z-0231-2025 · Class II · Ongoing · initiated 2024-09-16 · product code ITX: Epoxy used to seal the edge of the transducer into its paddle exceeded specification. This variability could attenuate the ultrasound signal with a potential impact on the quality of images obtained from the probes.

## Source and citation

- Cite as: Imacor, Inc. deviCERTS medical device catalogue. https://devicerts.com/manufacturers/imacor-inc (data as of 2026-11-21).
- Data sources: [FDA 510(k)](https://open.fda.gov/apis/device/510k/), [FDA GUDID](https://accessgudid.nlm.nih.gov/), [FDA recalls](https://open.fda.gov/apis/device/recall/)
- FDA recall data as of: 2026-11-01
- Data as of: 2026-11-21
- JSON: <https://devicerts.com/manufacturers/imacor-inc.json>
- Licence: [CC BY 4.0](https://creativecommons.org/licenses/by/4.0/). The deviCERTS layout and text are licensed under CC BY 4.0. Registry data remain under their source terms: U.S. FDA data (openFDA, AccessGUDID) are U.S. public domain; EUDAMED data are subject to the European Commission reuse terms.
- Attribution: DevicErts, https://devicerts.com/manufacturers/imacor-inc
- Compiled by deviCERTS (devicerts.com) from public medical device registries (EUDAMED, European Commission; U.S. FDA via openFDA; AccessGUDID, U.S. National Library of Medicine). deviCERTS is not an official register and gives no regulatory advice: the record in the registry itself prevails.
