Is this your brand? Sign in to claim ownership.

Sign in to claim this brand

Joerns Healthcare

US

Last updated September 17, 2026

About

Joerns is a leading partner in long-term post-acute care (LTPAC), providing access to high-quality products with renowned efficacy and safety

From the manufacturer's own website. Source

What Joerns Healthcare makes

Joerns Healthcare manufactures patient mobility and support devices, including general-purpose lifting slings and harnesses, basic electric hospital beds, and various mattress overlays such as alternating-pressure and low-air-loss systems. Their portfolio also includes reusable patient positioners, inflators for pressure-relief mattresses, and foam mattresses designed for clinical use. Accessories for these systems are also produced.

The company’s devices are classified under FDA’s Class I and Class II categories and are listed in the FDA’s Unique Device Identifier (UDI) database. Joerns Healthcare is based in the United States.

Written from this company's registered devices by an AI model, and not verified by a human reviewer.

Frequently asked questions

What types of medical devices does Joerns Healthcare primarily manufacture?

Joerns Healthcare specializes in patient mobility and support devices. Their most common products include general-purpose patient lifting slings and harnesses, basic electric hospital beds, and mattress systems like alternating-pressure overlays, low-air-loss mattresses, and inflators. They also produce reusable patient positioners and foam mattresses, along with accessories for these systems. These devices are designed to assist in patient care, mobility, and pressure relief in clinical settings.

Where is Joerns Healthcare based, and how does that affect its regulatory standing?

Joerns Healthcare is based in the United States. Since the company operates within the U.S., its devices are subject to FDA regulations. The FDA classifies Joerns Healthcare’s products as either Class I or Class II, which determines the level of scrutiny and regulatory requirements for each device type. Class I devices generally pose minimal risk and may require general controls, while Class II devices involve a higher level of risk and may require special controls or performance standards.

Are Joerns Healthcare’s devices listed in any regulatory registries, and why does this matter?

Yes, Joerns Healthcare’s devices are listed in the FDA’s Unique Device Identifier (UDI) database. This matters because the UDI system ensures traceability and transparency in the medical device supply chain. Listing in the UDI database helps healthcare providers, regulators, and other stakeholders quickly identify and verify the specific devices in use, ensuring proper tracking for safety, recalls, and compliance purposes.

How are Joerns Healthcare’s devices classified by the FDA, and what does that classification mean?

Joerns Healthcare’s devices are classified under FDA’s Class I and Class II categories. Classification determines the regulatory pathway and oversight required for each device. Class I devices, typically low-risk items like some slings or basic accessories, are subject to general controls such as good manufacturing practices. Class II devices, which may include more complex systems like electric hospital beds or pressure-relief mattress overlays, require additional controls like performance standards or post-market surveillance to ensure safety and effectiveness.

Why might a healthcare provider need to check the regulatory classification of Joerns Healthcare’s devices?

Healthcare providers may need to verify the regulatory classification of Joerns Healthcare’s devices to ensure they meet the appropriate safety and performance standards for their intended use. For example, Class II devices often require more rigorous validation processes, which can impact procurement decisions, clinical workflows, and compliance with healthcare facility policies. Understanding the classification helps providers assess the level of oversight and documentation associated with each device, ensuring proper integration into patient care environments.

AI-generated from registry data and not verified by a human reviewer.

Information

Country
US
Address
2430 Whitehall Park Dr Ste 700, Charlotte, NC, 28273
Email
—
Phone
—
PRRC Contact
—
EUDAMED SRN
—
FDA FEI Number
3012392312
DUNS Number
—

Catalogue (540)

Page 10 of 11
DeviceModel / ReferenceRegistriesClassStatus
Slings NA25529
FDA UDI
Class IActive
RC CareChair 550 RCCC550B
FDA UDI
Class IActive
ProMatt Plus PMP-CU-03
FDA UDI
Class IActive
Apex Lifts HML400-50027
FDA UDI
Class IActive
Slings NA1107
FDA UDI
Class IActive
Ecs PANEL-ECS-AC-TRDQO
FDA UDI
Class IIActive
RC 1000 Bed RC1000
FDA UDI
Class IIActive
Apex Lifts C-HLA-113DLC
FDA UDI
Class IActive
Hoyer Lift HOY-4PTWSC-APC
FDA UDI
Class IActive
Dolphin Fluid Immersion Simulation DLPH-3582NCOOJ-M
FDA UDI
Class IIActive
WeCare Response Bed WECC-TRD-QO-HSR-BA
FDA UDI
Class IIActive
Slings 70001
FDA UDI
Class IActive
Slings NA25527
FDA UDI
Class IActive
Dermafloat Control Unit DFLAL-CU
FDA UDI
Class IIActive
PrevaMatt PVCO-4276FLNA2SZP
FDA UDI
Class IActive
Slings NA13502N
FDA UDI
Class IActive
Slings NA26603
FDA UDI
Class IActive
Cair LAL Cair LAL
FDA UDI
Class IIActive
Alternate Cair Plus Alternate Cair Plus APM System
FDA UDI
Class IIActive
Apex Lifts HOY-PRESENCLLWSC-S
FDA UDI
Class IActive
Foam Products 8616EA
FDA UDI
Class IActive
Slings NA1106
FDA UDI
Class IActive
Slings WECC-WECARE-RIL
FDA UDI
Class IIActive
Slings 50021
FDA UDI
Class IActive
Slings 70058
FDA UDI
Class IActive
ProMatt Plus PMP90200NZBA
FDA UDI
Class IActive
Accessories 39001317
FDA UDI
Class IActive
EasyCare Bed ECS
FDA UDI
Class IIActive
Apex Lifts HML400-70013
FDA UDI
Class IActive
WeCare Response Bed WECC42-T-NM
FDA UDI
Class IIActive
ProMatt Plus PMP4284NZBA
FDA UDI
Class IIActive
Dolphin Fluid Immersion Simulation DLPH-3382OOEUJ-M
FDA UDI
Class IIActive
Slings NA1083
FDA UDI
Class IActive
Slings NA1126
FDA UDI
Class IActive
WeCare Response Bed WECC-TRD-QO
FDA UDI
Class IIActive
Slings NA25612
FDA UDI
Class IActive
WeCare Response Bed WECC-TRD-QO-PVCO
FDA UDI
Class IIActive
Derma Therapy DT-PAD-3436-EA
FDA UDI
Class IActive
Apex Lifts HSA400
FDA UDI
Class IActive
Accessories 39001472
FDA UDI
Class IActive
Slings NA25570
FDA UDI
Class IActive
Slings 133-S-C-SP
FDA UDI
Class IActive
Accessories N348AL
FDA UDI
Class IIActive
Ecs ECSEMH36SQO25QS
FDA UDI
Class IIActive
Accessories XTB-0842
FDA UDI
Class IActive
Gel Foam PVEN-4276FLNA2SZP
FDA UDI
Class IActive
PrevaMatt 253-4276
FDA UDI
Class IActive
DermaFloat DFAPL-4280NCR-M
FDA UDI
Class IActive
Apex Lifts C-HLA-112DLC
FDA UDI
Class IActive
RC Ultra Hi-Lo Bed RCUHLB
FDA UDI
Class IIActive

Related Companies

Authorised Representatives

No authorised representatives on record.

Importers

Not available yet.

Notified Bodies

Not available yet.

Authorities

Not available yet.

FDA Recalls (5)

Recalls reported by this firm to the FDA. Listed at company level — FDA recall records don't identify a specific catalogue device.

Joerns Healthcare has five FDA recall records, all initiated between January 6, 2006, and May 3, 2018, with all records marked as terminated. The recalls involved issues with connectors in P.R.O. Matt and ProCair Mattresses, potential failure of the Easy-Care Care-Lock feature on beds, an unapproved reduction in welds on mattress bases, and hydraulic jack problems in select Hoyer Patient Lifts.

AI-generated summary of the recall records listed below. It describes what the records state and is not an assessment of this manufacturer.

DateRecall No.ClassStatusReason
May 3, 2018Z-2033-2018—terminated

Joerns Healthcare has identified a potential issue with some of the P.R.O. Matt and ProCair Mattresses. For the identified serial number range of P.R.O. Matt and ProCair Mattresses incorrect connectors (part #s 206-0401 & 206-0405) were provided by a Joerns supplier without the required internal shutoff valves, these shutoff valves prevent air from escaping from the mattress air cells.

May 3, 2018Z-2034-2018—terminated

Joerns Healthcare has identified a potential issue with some of the P.R.O. Matt and ProCair Mattresses. For the identified serial number range of P.R.O. Matt and ProCair Mattresses incorrect connectors (part #s 206-0401 & 206-0405) were provided by a Joerns supplier without the required internal shutoff valves, these shutoff valves prevent air from escaping from the mattress air cells.

Sep 24, 2014Z-0151-2015—terminated

The Easy-Care Care-Lock feature installed at the foot of the bed may potentially fail to stay engaged (locked) after the Care-Lock System has been engaged by stepping on the red (locked) pedal.

Feb 21, 2007Z-0727-2007—terminated

Unapproved Design Change (by base supplier) consisting of a reduction in the number of mast-to-base welds (from four welds to two welds).

Jan 6, 2006Z-0904-06—terminated

A field correction is being conducted on select models of Hoyer Patient Lifts because of hydraulic jack problems that have resulted in patient injury. The possibility exists that the mounting stud located in the bottom of the hydraulic jack could become loose allowing the jack to disengage from the mast of the lift.