Is this your brand? Sign in to claim ownership.

Sign in to claim this brand

Joerns Healthcare

US

Last updated September 17, 2026

About

Joerns is a leading partner in long-term post-acute care (LTPAC), providing access to high-quality products with renowned efficacy and safety

From the manufacturer's own website. Source

What Joerns Healthcare makes

Joerns Healthcare manufactures patient mobility and support devices, including general-purpose lifting slings and harnesses, basic electric hospital beds, and various mattress overlays such as alternating-pressure and low-air-loss systems. Their portfolio also includes reusable patient positioners, inflators for pressure-relief mattresses, and foam mattresses designed for clinical use. Accessories for these systems are also produced.

The company’s devices are classified under FDA’s Class I and Class II categories and are listed in the FDA’s Unique Device Identifier (UDI) database. Joerns Healthcare is based in the United States.

Written from this company's registered devices by an AI model, and not verified by a human reviewer.

Frequently asked questions

What types of medical devices does Joerns Healthcare primarily manufacture?

Joerns Healthcare specializes in patient mobility and support devices. Their most common products include general-purpose patient lifting slings and harnesses, basic electric hospital beds, and mattress systems like alternating-pressure overlays, low-air-loss mattresses, and inflators. They also produce reusable patient positioners and foam mattresses, along with accessories for these systems. These devices are designed to assist in patient care, mobility, and pressure relief in clinical settings.

Where is Joerns Healthcare based, and how does that affect its regulatory standing?

Joerns Healthcare is based in the United States. Since the company operates within the U.S., its devices are subject to FDA regulations. The FDA classifies Joerns Healthcare’s products as either Class I or Class II, which determines the level of scrutiny and regulatory requirements for each device type. Class I devices generally pose minimal risk and may require general controls, while Class II devices involve a higher level of risk and may require special controls or performance standards.

Are Joerns Healthcare’s devices listed in any regulatory registries, and why does this matter?

Yes, Joerns Healthcare’s devices are listed in the FDA’s Unique Device Identifier (UDI) database. This matters because the UDI system ensures traceability and transparency in the medical device supply chain. Listing in the UDI database helps healthcare providers, regulators, and other stakeholders quickly identify and verify the specific devices in use, ensuring proper tracking for safety, recalls, and compliance purposes.

How are Joerns Healthcare’s devices classified by the FDA, and what does that classification mean?

Joerns Healthcare’s devices are classified under FDA’s Class I and Class II categories. Classification determines the regulatory pathway and oversight required for each device. Class I devices, typically low-risk items like some slings or basic accessories, are subject to general controls such as good manufacturing practices. Class II devices, which may include more complex systems like electric hospital beds or pressure-relief mattress overlays, require additional controls like performance standards or post-market surveillance to ensure safety and effectiveness.

Why might a healthcare provider need to check the regulatory classification of Joerns Healthcare’s devices?

Healthcare providers may need to verify the regulatory classification of Joerns Healthcare’s devices to ensure they meet the appropriate safety and performance standards for their intended use. For example, Class II devices often require more rigorous validation processes, which can impact procurement decisions, clinical workflows, and compliance with healthcare facility policies. Understanding the classification helps providers assess the level of oversight and documentation associated with each device, ensuring proper integration into patient care environments.

AI-generated from registry data and not verified by a human reviewer.

Information

Country
US
Address
2430 Whitehall Park Dr Ste 700, Charlotte, NC, 28273
Email
—
Phone
—
PRRC Contact
—
EUDAMED SRN
—
FDA FEI Number
3012392312
DUNS Number
—

Catalogue (540)

Page 6 of 11
DeviceModel / ReferenceRegistriesClassStatus
Accessories HOY-STAT-SCALE
FDA UDI
Class IActive
Accessories N606
FDA UDI
Class IIActive
Apex Lifts C-HLA-2-70056
FDA UDI
Class IActive
Apex Lifts HML400-50022
FDA UDI
Class IActive
Accessories N494AL
FDA UDI
Class IIActive
Apex HOY-ASCEND
FDA UDI
Class IActive
Slings 70011
FDA UDI
Class IActive
Dermafloat APL Control Unit DFAPL-CU
FDA UDI
Class IIActive
Slings NA1053
FDA UDI
Class IActive
Hoyer HPL500 HPL500-S2
FDA UDI
Class IActive
Apex Lifts HML400-50025
FDA UDI
Class IActive
Apex Lifts C-HLA-2-50025
FDA UDI
Class IActive
Ecs E61P0913S_0SG42BQS
FDA UDI
Class IIActive
Dolphin Fluid Immersion Simulation DLPH-4282NCOOJ-M
FDA UDI
Class IIUnknown
Slings NA25621
FDA UDI
Class IActive
Accessories N341AL
FDA UDI
Class IIActive
Alternate Cair Plus ACAPM-3680-M
FDA UDI
Class IIActive
Dolphin Fluid Immersion Simulation DLPH-4882OOOOJ-M
FDA UDI
Class IIUnknown
ProMatt Plus PMS3680NZBA
FDA UDI
Class IIActive
Joerns DermaFloat LR Mattress DermaFloat LR
FDA UDI
Class IIActive
Accessories N303AL
FDA UDI
Class IIActive
WeCare Response Bed WECC-TRD-NM-HSR-BA
FDA UDI
Class IIActive
PrevaMatt PVBA-3580FLNANYZP
FDA UDI
Class IActive
TxCair Plus TX Cair Plus
FDA UDI
Class IIActive
Apex Lifts HML400-70056
FDA UDI
Class IActive
Slings NA1050
FDA UDI
Class IActive
Slings NA25579
FDA UDI
Class IActive
Slings 70012
FDA UDI
Class IActive
Hoyer HPL500 HPL500-EL-S2
FDA UDI
Class IActive
Slings NA25578
FDA UDI
Class IActive
PrevaMatt 253-3684
FDA UDI
Class IActive
Accessories N119
FDA UDI
Class IIActive
Slings 70053
FDA UDI
Class IActive
TxCair Plus TXVMLAL-3588-M
FDA UDI
Class IIActive
Apex Lifts C-HLA-2
FDA UDI
Class IActive
WeCare Response Bed WECC42-T-NM-HSR-CO
FDA UDI
Class IIActive
Slings NA25502
FDA UDI
Class IActive
PrevaMatt 550484-CCBA
FDA UDI
Class IActive
Apex Lifts HOY-SWITCH
FDA UDI
Class IActive
Apex Lifts C-HLA-113PLC
FDA UDI
Class IActive
Slings NA25622
FDA UDI
Class IActive
Slings NA25613
FDA UDI
Class IActive
Accessories N228AL
FDA UDI
Class IIActive
Slings NA1625
FDA UDI
Class IActive
Apex Lifts HML400-70057
FDA UDI
Class IActive
Gel Foam PVEN-3584FLNA2SZP
FDA UDI
Class IActive
Accessories DC9228BA
FDA UDI
Class IIActive
Slings NA1058
FDA UDI
Class IActive
Accessories N718
FDA UDI
Class IIActive
Slings NA1075
FDA UDI
Class IActive

Related Companies

Authorised Representatives

No authorised representatives on record.

Importers

Not available yet.

Notified Bodies

Not available yet.

Authorities

Not available yet.

FDA Recalls (5)

Recalls reported by this firm to the FDA. Listed at company level — FDA recall records don't identify a specific catalogue device.

Joerns Healthcare has five FDA recall records, all initiated between January 6, 2006, and May 3, 2018, with all records marked as terminated. The recalls involved issues with connectors in P.R.O. Matt and ProCair Mattresses, potential failure of the Easy-Care Care-Lock feature on beds, an unapproved reduction in welds on mattress bases, and hydraulic jack problems in select Hoyer Patient Lifts.

AI-generated summary of the recall records listed below. It describes what the records state and is not an assessment of this manufacturer.

DateRecall No.ClassStatusReason
May 3, 2018Z-2033-2018—terminated

Joerns Healthcare has identified a potential issue with some of the P.R.O. Matt and ProCair Mattresses. For the identified serial number range of P.R.O. Matt and ProCair Mattresses incorrect connectors (part #s 206-0401 & 206-0405) were provided by a Joerns supplier without the required internal shutoff valves, these shutoff valves prevent air from escaping from the mattress air cells.

May 3, 2018Z-2034-2018—terminated

Joerns Healthcare has identified a potential issue with some of the P.R.O. Matt and ProCair Mattresses. For the identified serial number range of P.R.O. Matt and ProCair Mattresses incorrect connectors (part #s 206-0401 & 206-0405) were provided by a Joerns supplier without the required internal shutoff valves, these shutoff valves prevent air from escaping from the mattress air cells.

Sep 24, 2014Z-0151-2015—terminated

The Easy-Care Care-Lock feature installed at the foot of the bed may potentially fail to stay engaged (locked) after the Care-Lock System has been engaged by stepping on the red (locked) pedal.

Feb 21, 2007Z-0727-2007—terminated

Unapproved Design Change (by base supplier) consisting of a reduction in the number of mast-to-base welds (from four welds to two welds).

Jan 6, 2006Z-0904-06—terminated

A field correction is being conducted on select models of Hoyer Patient Lifts because of hydraulic jack problems that have resulted in patient injury. The possibility exists that the mounting stud located in the bottom of the hydraulic jack could become loose allowing the jack to disengage from the mast of the lift.