Is this your brand? Sign in to claim ownership.

Sign in to claim this brand

Trimed, INC.

US

Last updated September 17, 2026

Information

Country
US
Address
27533 Avenue Hopkins, Santa Clarita, CA, 91355
LinkedIn
—
Facebook
—
Phone
+1(661)255-7406
PRRC Contact
—
EUDAMED SRN
—
FDA FEI Number
3001236812
DUNS Number
138041277

Catalogue (2974)

Page 12 of 60
DeviceModel / ReferenceRegistriesClassStatus
Volar Bearing Plates VLBPR-3-7
FDA UDI
Class IIActive
Generic Instruments QUICK-HNDL
FDA UDI
Class IActive
HeadCannCompScrew 2.3mm HL2310
FDA UDI
Class IIActive
CannCompScrew 5.5mm (SelfDrill) L5568
FDA UDI
Class IIActive
Foot Plates CSOP6-6
FDA UDI
Class IIActive
Tools - TSS JA300
FDA UDI
Class IActive
Volar Bearing Plates VLBPR-3-6
FDA UDI
Class IIActive
Tools - EFS OSW-GUIDE
FDA UDI
Class IActive
3.5 VA Locking Screw TRXV3.5-16 T
FDA UDI
Class IIActive
Tools - Screws HXDRIVR-3.5 AO
FDA UDI
Class IActive
Tools - AFS AFS-FIB-LID
FDA UDI
Class IActive
Saw Blades OSB-9S
FDA UDI
Class IActive
Peg Plates RPGL-10
FDA UDI
Class IIActive
HeadCannCompScrew 3.5mm HL3536
FDA UDI
Class IIActive
Torx Cortical Screw TRX2.3-16
FDA UDI
Class IIActive
CannCompScrew 2.0mm (SelfDrill) L2018
FDA UDI
Class IIActive
4.0 VA Locking Screw TRXV4.0-60 T
FDA UDI
Class IIActive
CannCompScrew 4.5mm (Classic) C4534
FDA UDI
Class IIActive
Tools - WFS WCC
FDA UDI
Class IActive
Pin Plates RCP5
FDA UDI
Class IIActive
Drills DRILL-3.70CL
FDA UDI
Class IActive
Foot Plates HP-4S
FDA UDI
Class IIActive
CannCompScrew 1.7mm (SelfDrill) L1713
FDA UDI
Class IIActive
3.5 Locking Screw HEXL3.5-46 T
FDA UDI
Class IIActive
2.7 VA Locking Screw TRXV2.7-10 T
FDA UDI
Class IIActive
HeadCannCompScrew 4.5mm HS4548
FDA UDI
Class IIActive
3.5 Cortical Screw TRXC3.5-50 T
FDA UDI
Class IIActive
Volar Bearing Plates VLBPR-5-7
FDA UDI
Class IIActive
3.5 Cortical Screw TRXC3.5-32 T
FDA UDI
Class IIActive
FPS Non-Locking Screw 3.5mm CNS3.5-22
FDA UDI
Class IIActive
Tools - EFS OSDG-2.0
FDA UDI
Class IActive
4.0 Cortical Screw TRXC4.0-08 T
FDA UDI
Class IIActive
Tools - HPS FORCP
FDA UDI
Class IActive
Tools - DHF TRJ-DHMN
FDA UDI
Class IActive
CannCompScrew 7.3mm (SelfDrill) S7364
FDA UDI
Class IIActive
HeadCannCompScrew 2.3mm HL2308
FDA UDI
Class IIActive
FMS Screw 4.5mm JHEX4560
FDA UDI
Class IIActive
Cancellous Screw 3.8mm CAB3.8-18
FDA UDI
Class IIActive
3.5 VA Locking Screw TRXV3.5-60 T
FDA UDI
Class IIActive
Wireforms DBP32-2
FDA UDI
Class IIActive
2.7 Cortical Screw HEXC2.7-30 T
FDA UDI
Class IIActive
CannCompScrew 3.0mm (SelfDrill) S3014
FDA UDI
Class IIActive
Hex Cortical Screw 3.2mm HEX3.2-42
FDA UDI
Class IIActive
SmallThreadedIMNail 1.8mm (sst) IMN1.8-12 S
FDA UDI
Class IIActive
Crosslock Screw XLS3.4-58
FDA UDI
Class IIActive
2.3 Locking Screw TRXL2.3-36 T
FDA UDI
Class IIActive
Tools - Screws HXDRIVR-2.5
FDA UDI
Class IActive
Torx Cortical Screw TRX2.3-29
FDA UDI
Class IIActive
S.A. - Volar Bearing Plates VLBPR-5-4 (O)
FDA UDI
Class IIActive
3.5 VA Locking Screw TRXV3.5-42 T
FDA UDI
Class IIActive

Related Companies

Authorised Representatives

No authorised representatives on record.

Importers

Not available yet.

Notified Bodies

Not available yet.

Authorities

Not available yet.

FDA Recalls (18)

Recalls reported by this firm to the FDA. Listed at company level — FDA recall records don't identify a specific catalogue device.

DateRecall No.ClassStatusReason
Mar 19, 2024Z-1792-2024—open, classified

Nail system contains an out of specification driver-socket which could result in inability to pick up nails or apply sufficient torque.

Mar 19, 2024Z-1791-2024—open, classified

Nail system contains an out of specification driver-socket which could result in inability to pick up nails or apply sufficient torque.

Nov 28, 2023Z-0932-2024—open, classified

Plates, part of a wrist fixation system, are affixed during surgery with bearings that may pop out from distal peg holes.

Dec 22, 2022Z-1101-2023—open, classified

Overly aggressive tension on the pull suture, while passing the medial button through a bone/soft tissue tunnel across the fibula and tibia, can exceed its strength causing it to break.

Sep 28, 2018Z-0356-2020—open, classified

The epoxy on Apex manufactured epoxy-coated instruments can pop off.

Sep 28, 2018Z-0357-2020—open, classified

The epoxy on Apex manufactured epoxy-coated instruments can pop off.

Sep 28, 2018Z-0355-2020—open, classified

The epoxy on Apex manufactured epoxy-coated instruments can pop off.

Sep 28, 2018Z-0358-2020—open, classified

The spring on the PEG-Extender can rust due to the type of steel used to manufacture it.

Sep 28, 2018Z-0359-2020—open, classified

The WHD/WHV impactors can rust over time due to an improper manufacturing process.

Aug 24, 2018Z-1214-2019—terminated

The bone screw is shorter than the intended design specification.

Aug 24, 2018Z-0118-2020—terminated

Modifications to the specification were not appropriately qualified through the company's design control process which may result in structural integrity issues of the device.

Aug 15, 2018Z-0366-2020—terminated

The firm has become aware that the angled-hole of certain semi-tubular design bone plates may have been modified from its specification, and the modification may not have been fully qualified.

Apr 16, 2018Z-2877-2018—terminated

Two instrument holes located on the side of the plate, which act to align the saw guide are located on the wrong side of the plate

Apr 13, 2018Z-2265-2018—terminated

During a retrospective review of sterilization records, TriMed has determined that evidence of quarterly dose audits/verification required to comply with the regulations could not be found. Sterilization records indicate that all lots of staples were irradiated to at least the defined dose. There is a risk that this issue could result in patient infection if not properly sterilized.

Apr 13, 2018Z-2264-2018—terminated

During a retrospective review of sterilization records, TriMed has determined that evidence of quarterly dose audits/verification required to comply with the regulations could not be found. Sterilization records indicate that all lots of staples were irradiated to at least the defined dose. There is a risk that this issue could result in patient infection if not properly sterilized.

Apr 13, 2018Z-2263-2018—terminated

During a retrospective review of sterilization records, TriMed has determined that evidence of quarterly dose audits/verification required to comply with the regulations could not be found. Sterilization records indicate that all lots of staples were irradiated to at least the defined dose. There is a risk that this issue could result in patient infection if not properly sterilized.

Apr 13, 2018Z-2262-2018—terminated

During a retrospective review of sterilization records, TriMed has determined that evidence of quarterly dose audits/verification required to comply with the regulations could not be found. Sterilization records indicate that all lots of staples were irradiated to at least the defined dose. There is a risk that this issue could result in patient infection if not properly sterilized.

Jan 11, 2018Z-1373-2018—terminated

Following the completion of sterilization cycle(s) of the impacted Hex Driver, the epoxy color band on the impacted Hex Driver can migrate down the shaft and/or potentially onto the sterilization tray or caddy.