Is this your brand? Sign in to claim ownership.

Sign in to claim this brand

Trimed, INC.

US

Last updated September 17, 2026

Information

Country
US
Address
27533 Avenue Hopkins, Santa Clarita, CA, 91355
LinkedIn
—
Facebook
—
Phone
+1(661)255-7406
PRRC Contact
—
EUDAMED SRN
—
FDA FEI Number
3001236812
DUNS Number
138041277

Catalogue (2974)

Page 35 of 60
DeviceModel / ReferenceRegistriesClassStatus
Hand Plates MMS-8
FDA UDI
Class IIActive
FPS Non-Locking Screw 2.7mm CNS2.7-18
FDA UDI
Class IIActive
Volar Bearing Plates VBEAR-7-7N
FDA UDI
Class IIActive
Foot Plates MFUB-4
FDA UDI
Class IIActive
4.0 VA Locking Screw TRXV4.0-22 T
FDA UDI
Class IIActive
Foot Plates FFC-6
FDA UDI
Class IIActive
CannCompScrew 4.5mm (SelfDrill) S4536
FDA UDI
Class IIActive
Tools-INS INS-TRAY
FDA UDI
Class IActive
CannCompScrew 3.5mm (SelfDrill) L3530
FDA UDI
Class IIActive
Torx Cortical Screw TRX2.3-15
FDA UDI
Class IIActive
3.5 Locking Screw HEXL3.5-40 T
FDA UDI
Class IIActive
CannCompScrew 7.3mm (SelfDrill) L7362
FDA UDI
Class IIActive
Tools - WFS WFS-SCRWLCK
FDA UDI
Class IActive
CannCompScrew 7.3mm (SelfDrill) S7362
FDA UDI
Class IIActive
CannCompScrew 3.5mm (SelfDrill) L3543
FDA UDI
Class IIActive
FPS Locking Screw 2.7mm CLS2.7-22
FDA UDI
Class IIActive
3.5 VA Locking Screw TRXV3.5-34 T
FDA UDI
Class IIActive
HPS Cortical Screw 1.2mm PHCS1.2-06
FDA UDI
Class IIActive
Tools - Screws GUIDE-1.8/2.3
FDA UDI
Class IActive
CannCompScrew 4.5mm (Classic) C4532
FDA UDI
Class IIActive
4.0 Cortical Screw TRXC4.0-50 T
FDA UDI
Class IIActive
CannCompScrew 3.0mm (Classic) C3021
FDA UDI
Class IIActive
Tools - FMS FMS-SCREW
FDA UDI
Class IActive
Tools - AFS AFS-SCREW
FDA UDI
Class IActive
Hook Plates OHOOKL-17
FDA UDI
Class IIActive
Volar Bearing Plates VBEAL-3-7N
FDA UDI
Class IIActive
K-Wires WIRE-1.1/120D
FDA UDI
Class IIActive
HeadCannCompScrew 3.0mm HL3018
FDA UDI
Class IIActive
CannCompScrew 2.0mm (SelfDrill) L2021
FDA UDI
Class IIActive
Foot Plates LP35-1
FDA UDI
Class IIActive
Cortical Screws 3.2mm CBS3.2-24
FDA UDI
Class IIActive
Tools - FMS FMS-TRAY
FDA UDI
Class IActive
HeadCannCompScrew 7.3mm HS73100
FDA UDI
Class IIActive
CannCompScrew 4.5mm (Classic) C4526
FDA UDI
Class IIActive
CannCompScrew 3.0mm (SelfDrill) L3033
FDA UDI
Class IIActive
Tools - Screws DVSNP AO
FDA UDI
Class IActive
HeadCannCompScrew 1.7mm HL1712
FDA UDI
Class IIActive
Foot Plates MFU-8
FDA UDI
Class IIActive
HeadCannCompScrew 7.3mm HL7384
FDA UDI
Class IIActive
CannCompScrew 3.5mm (SelfDrill) L3539
FDA UDI
Class IIActive
Tools - CFS CFS-SCREW
FDA UDI
Class IActive
CannCompScrew 5.5mm (SelfDrill) S5526
FDA UDI
Class IIActive
Tools - FPS FPS-FOR
FDA UDI
Class IActive
Hook Plates OHOOKL-6
FDA UDI
Class IIActive
CannCompScrew 2.3mm (sst) L2310 S
FDA UDI
Class IIActive
CannCompScrew 3.0mm (SelfDrill) S3017
FDA UDI
Class IIActive
Foot Plates MFUA-7
FDA UDI
Class IIActive
CannCompScrew 5.5mm (SelfDrill) L5556
FDA UDI
Class IIActive
Tools- HCS MOSG-1S
FDA UDI
Class IActive
Tools - HCS HCS-SCREW2.0-LID
FDA UDI
Class IActive

Related Companies

Authorised Representatives

No authorised representatives on record.

Importers

Not available yet.

Notified Bodies

Not available yet.

Authorities

Not available yet.

FDA Recalls (18)

Recalls reported by this firm to the FDA. Listed at company level — FDA recall records don't identify a specific catalogue device.

DateRecall No.ClassStatusReason
Mar 19, 2024Z-1792-2024—open, classified

Nail system contains an out of specification driver-socket which could result in inability to pick up nails or apply sufficient torque.

Mar 19, 2024Z-1791-2024—open, classified

Nail system contains an out of specification driver-socket which could result in inability to pick up nails or apply sufficient torque.

Nov 28, 2023Z-0932-2024—open, classified

Plates, part of a wrist fixation system, are affixed during surgery with bearings that may pop out from distal peg holes.

Dec 22, 2022Z-1101-2023—open, classified

Overly aggressive tension on the pull suture, while passing the medial button through a bone/soft tissue tunnel across the fibula and tibia, can exceed its strength causing it to break.

Sep 28, 2018Z-0356-2020—open, classified

The epoxy on Apex manufactured epoxy-coated instruments can pop off.

Sep 28, 2018Z-0357-2020—open, classified

The epoxy on Apex manufactured epoxy-coated instruments can pop off.

Sep 28, 2018Z-0355-2020—open, classified

The epoxy on Apex manufactured epoxy-coated instruments can pop off.

Sep 28, 2018Z-0358-2020—open, classified

The spring on the PEG-Extender can rust due to the type of steel used to manufacture it.

Sep 28, 2018Z-0359-2020—open, classified

The WHD/WHV impactors can rust over time due to an improper manufacturing process.

Aug 24, 2018Z-1214-2019—terminated

The bone screw is shorter than the intended design specification.

Aug 24, 2018Z-0118-2020—terminated

Modifications to the specification were not appropriately qualified through the company's design control process which may result in structural integrity issues of the device.

Aug 15, 2018Z-0366-2020—terminated

The firm has become aware that the angled-hole of certain semi-tubular design bone plates may have been modified from its specification, and the modification may not have been fully qualified.

Apr 16, 2018Z-2877-2018—terminated

Two instrument holes located on the side of the plate, which act to align the saw guide are located on the wrong side of the plate

Apr 13, 2018Z-2265-2018—terminated

During a retrospective review of sterilization records, TriMed has determined that evidence of quarterly dose audits/verification required to comply with the regulations could not be found. Sterilization records indicate that all lots of staples were irradiated to at least the defined dose. There is a risk that this issue could result in patient infection if not properly sterilized.

Apr 13, 2018Z-2264-2018—terminated

During a retrospective review of sterilization records, TriMed has determined that evidence of quarterly dose audits/verification required to comply with the regulations could not be found. Sterilization records indicate that all lots of staples were irradiated to at least the defined dose. There is a risk that this issue could result in patient infection if not properly sterilized.

Apr 13, 2018Z-2263-2018—terminated

During a retrospective review of sterilization records, TriMed has determined that evidence of quarterly dose audits/verification required to comply with the regulations could not be found. Sterilization records indicate that all lots of staples were irradiated to at least the defined dose. There is a risk that this issue could result in patient infection if not properly sterilized.

Apr 13, 2018Z-2262-2018—terminated

During a retrospective review of sterilization records, TriMed has determined that evidence of quarterly dose audits/verification required to comply with the regulations could not be found. Sterilization records indicate that all lots of staples were irradiated to at least the defined dose. There is a risk that this issue could result in patient infection if not properly sterilized.

Jan 11, 2018Z-1373-2018—terminated

Following the completion of sterilization cycle(s) of the impacted Hex Driver, the epoxy color band on the impacted Hex Driver can migrate down the shaft and/or potentially onto the sterilization tray or caddy.