Is this your brand? Sign in to claim ownership.

Trimed, INC.

Last updated September 17, 2026

Information

Country: US
Address: 27533 Avenue Hopkins, Santa Clarita, CA, 91355
Website: trimedortho.com
LinkedIn: —
Facebook: —
Email: [email protected]
Phone: +1(661)255-7406
PRRC Contact: —
EUDAMED SRN: —
FDA FEI Number: 3001236812
DUNS Number: 138041277

Catalogue (2974)

Page 41 of 60

Device	Model / Reference	Registries	Class	Status
2.7 Cortical Screw	HEXC2.7-38 T	FDA UDI	Class II	Active
Locking HEX Screw 3.2mm	LHEX3.2-38	FDA UDI	Class II	Active
Elastic Staples	ES-15x12	FDA UDI	Class II	Active
SmallThreadedIMNail 2.4mm (Ti)	IMN2.4-55 T	FDA UDI	Class II	Active
CannCompScrew 7.3mm (SelfDrill)	S7344	FDA UDI	Class II	Active
Tools - HPS	JHNDL	FDA UDI	Class I	Active
2.7 Cortical Screw	HEXC2.7-16 T	FDA UDI	Class II	Active
SmallThreadedIMNail 1.8 (Ti)	IMN1.8-24 T	FDA UDI	Class II	Active
Locking Cortical Screw 3.2mm	LHEX3.2-10	FDA UDI	Class II	Unknown
2.7 Cortical Screw	HEXC2.7-44 T	FDA UDI	Class II	Active
Volar Fixed Angle Plates	VFPR-5-7S	FDA UDI	Class II	Active
2.7 Cortical Screw	TRXC2.7-10 T	FDA UDI	Class II	Active
Tools - RSO	GSRSO-3	FDA UDI	Class I	Active
Tools - Screws	HXDRIVR-3.5CL AO	FDA UDI	Class I	Active
Hex Cortical Screw 3.2mm	HEX3.2-12	FDA UDI	Class II	Active
FPS Locking Screw 2.7mm	CLS2.7-10	FDA UDI	Class II	Active
Cortical Screws 2.3mm	CBS2.3-18	FDA UDI	Class II	Active
CannCompScrew 7.3mm (Classic)	CL7372	FDA UDI	Class II	Active
Elastic Staples	ES-08x08	FDA UDI	Class II	Active
Locking Cortical Screw 3.2mm	LCBS3.2-32	FDA UDI	Class II	Active
2.7 VA Locking Screw	HEXV2.7-36 T	FDA UDI	Class II	Active
Tools - FPS	GUIDEVAL-2.3	FDA UDI	Class I	Active
Tools - WFS	BRG-BRKT	FDA UDI	Class I	Active
Foot Plates	MFUB-8	FDA UDI	Class II	Active
Cann. Hex Cortical Screw 3.2mm	HEX3.2C-22	FDA UDI	Class II	Active
Locking Cortical Screw 2.7mm	LCBS2.7-34	FDA UDI	Class II	Active
CannCompScrew 3.0mm (SelfDrill)	L3037	FDA UDI	Class II	Active
Tools - Screws	GAUGE-L	FDA UDI	Class I	Active
HeadCannCompScrew 7.3mm	HS7396	FDA UDI	Class II	Active
Volar Bearing Plates	VLBPR-7-7	FDA UDI	Class II	Active
FPS Non-Locking Screw 3.5mm	CNS3.5-24	FDA UDI	Class II	Active
HeadCannCompScrew 3.0mm	HL3020	FDA UDI	Class II	Active
CannCompScrew 3.0mm (Classic)	C3034	FDA UDI	Class II	Active
Tools - WFS (C)	GRIPR-2.3 MCH	FDA UDI	Class I	Active
HeadCannCompScrew 3.5mm	HL3538	FDA UDI	Class II	Active
CannCompScrew 3.0mm (SelfDrill)	L3034	FDA UDI	Class II	Active
S.A. - Volar Bearing Plates	VLBPL-4-6	FDA UDI	Class II	Active
Tools - AFS	HOOK-GUIDE	FDA UDI	Class I	Active
Tools - Screws	HEX2.0-GRIPR	FDA UDI	Class I	Active
Tools - TSS	GDSTPL-2.0	FDA UDI	Class I	Active
Tools - FMS	TAP-4.5C AO	FDA UDI	Class I	Active
Volar Bearing Plates	VLBPL-3-6	FDA UDI	Class II	Active
Locking Cortical Screw 3.2mm	LCBS3.2-60	FDA UDI	Class II	Active
3.5 Locking Screw	HEXL3.5-16 T	FDA UDI	Class II	Active
CannCompScrew 3.0mm (Classic)	C3020	FDA UDI	Class II	Active
2.7 Locking Screw	HEXL2.7-30 T	FDA UDI	Class II	Active
Posterior Malleolar Plates	PMLB-5-3	FDA UDI	Class II	Active
CannCompScrew 3.5mm (sst)	L3535 S	FDA UDI	Class II	Active
S.A. - Hook Plates	HOOKR-4	FDA UDI	Class II	Active
Drills	DRILL-2.3/080	FDA UDI	Class I	Active

Related Companies

Authorised Representatives

No authorised representatives on record.

Importers

Not available yet.

Notified Bodies

Not available yet.

Authorities

Not available yet.

FDA Recalls (18)

Recalls reported by this firm to the FDA. Listed at company level — FDA recall records don't identify a specific catalogue device.

Date	Recall No.	Class	Status	Reason
Mar 19, 2024	Z-1792-2024	—	open, classified	Nail system contains an out of specification driver-socket which could result in inability to pick up nails or apply sufficient torque.
Mar 19, 2024	Z-1791-2024	—	open, classified	Nail system contains an out of specification driver-socket which could result in inability to pick up nails or apply sufficient torque.
Nov 28, 2023	Z-0932-2024	—	open, classified	Plates, part of a wrist fixation system, are affixed during surgery with bearings that may pop out from distal peg holes.
Dec 22, 2022	Z-1101-2023	—	open, classified	Overly aggressive tension on the pull suture, while passing the medial button through a bone/soft tissue tunnel across the fibula and tibia, can exceed its strength causing it to break.
Sep 28, 2018	Z-0356-2020	—	open, classified	The epoxy on Apex manufactured epoxy-coated instruments can pop off.
Sep 28, 2018	Z-0357-2020	—	open, classified	The epoxy on Apex manufactured epoxy-coated instruments can pop off.
Sep 28, 2018	Z-0355-2020	—	open, classified	The epoxy on Apex manufactured epoxy-coated instruments can pop off.
Sep 28, 2018	Z-0358-2020	—	open, classified	The spring on the PEG-Extender can rust due to the type of steel used to manufacture it.
Sep 28, 2018	Z-0359-2020	—	open, classified	The WHD/WHV impactors can rust over time due to an improper manufacturing process.
Aug 24, 2018	Z-1214-2019	—	terminated	The bone screw is shorter than the intended design specification.
Aug 24, 2018	Z-0118-2020	—	terminated	Modifications to the specification were not appropriately qualified through the company's design control process which may result in structural integrity issues of the device.
Aug 15, 2018	Z-0366-2020	—	terminated	The firm has become aware that the angled-hole of certain semi-tubular design bone plates may have been modified from its specification, and the modification may not have been fully qualified.
Apr 16, 2018	Z-2877-2018	—	terminated	Two instrument holes located on the side of the plate, which act to align the saw guide are located on the wrong side of the plate
Apr 13, 2018	Z-2265-2018	—	terminated	During a retrospective review of sterilization records, TriMed has determined that evidence of quarterly dose audits/verification required to comply with the regulations could not be found. Sterilization records indicate that all lots of staples were irradiated to at least the defined dose. There is a risk that this issue could result in patient infection if not properly sterilized.
Apr 13, 2018	Z-2264-2018	—	terminated	During a retrospective review of sterilization records, TriMed has determined that evidence of quarterly dose audits/verification required to comply with the regulations could not be found. Sterilization records indicate that all lots of staples were irradiated to at least the defined dose. There is a risk that this issue could result in patient infection if not properly sterilized.
Apr 13, 2018	Z-2263-2018	—	terminated	During a retrospective review of sterilization records, TriMed has determined that evidence of quarterly dose audits/verification required to comply with the regulations could not be found. Sterilization records indicate that all lots of staples were irradiated to at least the defined dose. There is a risk that this issue could result in patient infection if not properly sterilized.
Apr 13, 2018	Z-2262-2018	—	terminated	During a retrospective review of sterilization records, TriMed has determined that evidence of quarterly dose audits/verification required to comply with the regulations could not be found. Sterilization records indicate that all lots of staples were irradiated to at least the defined dose. There is a risk that this issue could result in patient infection if not properly sterilized.
Jan 11, 2018	Z-1373-2018	—	terminated	Following the completion of sterilization cycle(s) of the impacted Hex Driver, the epoxy color band on the impacted Hex Driver can migrate down the shaft and/or potentially onto the sterilization tray or caddy.