Skip to content

High Energy Collimator 04355124

by Siemens Medical Solutions USA, Inc.

High Energy Collimator 04355124 (4355124..) is a multi-hole nuclear medicine system collimator (FDA Class II; FDA product code KPS, System, tomography, computed, emission) made by Siemens Medical Solutions USA, Inc., cleared under FDA 510(k) K142006 on 21 Aug 2014 and listed in FDA GUDID since 24 Sep 2016 (UDI-DI 04056869001913), active as of 23 Oct 2026. 7 FDA recalls are linked to it.

Active United States. Also listed in GUDID (US).

510(k)

Valid until

No expiry

510(k) clearance is not time-limited

FDA recalls

None ongoing

9 closed

Documents

510(k) K142006

FDA submission, from GUDID

Trust

Unverified

Source GUDID, synced 23 Oct 2026.

Regulatory status

as of registry sync 23 Oct 2026

RegionAuthorizationNumberDateStatus
United StatesGUDID listing Number04056869001913 UDI-DI Date24 Sep 2016ListedStatusListed GUDID: in commercial distribution
United StatesFDA 510(k)SESE from GUDID Substantially Equivalent · Special NumberK142006 Date21 Aug 2014DecidedStatusActive

Official records

From the FDA record

MRI safety
Labeling does not contain MRI Safety Information
Natural rubber latex
No latex statement on the label
Sterility
Supplied non-sterile

From the GUDID record (AccessGUDID), as read on 23 Oct 2026, as the labeller entered it.

Across registries

2 registries list this device

  • FDA 510(k) K142006 decided 21 Aug 2014 Active
  • FDA GUDID UDI-DI 04056869001913 listed 24 Sep 2016 Listed

Recalls

9 recalls · FDA

    • Terminated Z-2758-2016 FDA Class II initiated 5 Aug 2016 on shared 510(k) K142006

    "We have received reports of patients hair being caught in the e.cam and Symbia E patient bed up/down drive. The purpose of this letter is to remind users of the patient positioning instructions for your e.cam or Symbia E system and to inform you of an update that will be performed by your local Siemens service representative."

    • Terminated Z-2898-2020 FDA Class II initiated 31 Mar 2016

    E. CAM and Symbia system with foresight detectors performing gated or dynamic acquisition may lose some detector time information. Our risk analysis indicates that the probability of occurrence is remote. SPECT: To detect or image the distribution of radionuclides in the body or organ, using the following techniques: planar imaging, whole body imaging, tomographic imaging for isotopes with energies up to 588keV. CT: The CT component is intended to produce cross sectional images of the body by computer reconstruction of x-ray transmission data from either the same axial place taken at different angles or spiral planes taken at different angles. SPECT+CT: Perform CT scans and nuclear imaging studies within the same instrument. To obtain attenuation corrected images and to provide registration of anatomical and physiological images within the patient's anatomy.

  • 2 recalls, same reason

    • Terminated Z-1262-2016 FDA Class II initiated 26 Feb 2016
    • Terminated Z-1263-2016 FDA Class II initiated 26 Feb 2016

    We received a customer complaint that Siemens reported via the MedWatch process (1423253-2015-00002). The result of a Hazard Analysis and CAPA investigation, we have determined that for e.cam or Symbia E systems that although the existing user manual is correct, additional supplemental instructions, with the inclusion of visual aids, may further clarify and emphasize the proper collimator change

    • Terminated Z-0687-2016 FDA Class II initiated 31 Dec 2015 on shared 510(k) K142006

    To provide operator instruction manuals for the e.cam Dual Signature; Gamma Camera that were not sent in its entirety when the e.cam systems were refurbished and shipped to the customer.

  • 3 recalls, same reason

    • Terminated Z-2437-2015 FDA Class II initiated 31 Jul 2015
    • Terminated Z-2436-2015 FDA Class II initiated 31 Jul 2015
    • Terminated Z-2435-2015 FDA Class II initiated 31 Jul 2015

    Fuses with the improper amperage rating were installed in the Symbia S, Symbia T Series and Symbia lntevo systems. These fuses, in conjunction with a specific failure mode of the Power Controller assembly, could lead to the overheating of the assembly.

    • Terminated Z-0208-2016 FDA Class II initiated 26 Jun 2015

    Potential failure mode related to the radial brake, where the detector was able to drift, led to a re-design of the brake redundancy circuit. The redesigned Brake Redundancy Circuit will force even a defective brake to engage in the unpowered state by applying a reverse charge to the brake and ensuring the brake has demagnetized.

Recalls on a shared submission name another device cleared under the same FDA submission as this one.

Timeline

11 dated events

  1. Recall initiated FDA recalls Z-0208-2016
  2. Recall initiated FDA recalls Z-2437-2015
  3. Recall initiated FDA recalls Z-2436-2015
  4. Recall initiated FDA recalls Z-2435-2015
  5. Recall initiated FDA recalls Z-0687-2016
  6. Recall initiated FDA recalls Z-1262-2016
  7. Recall initiated FDA recalls Z-1263-2016
  8. Recall initiated FDA recalls Z-2898-2020
  9. Recall initiated FDA recalls Z-2758-2016
  10. Listed FDA GUDID 04056869001913

1 earlier event are in the sections above.

Coverage

1 jurisdiction

United States of America
  • Active
  • Expiring
  • Withdrawn
  • Listed
  • Not covered

United States — FDA 510(k) Active

Specification

GUDID

Trade name
High Energy Collimator
Generic name
Multi-hole nuclear medicine system collimator, low-energy
Model / Ref / Catalog
04355124, 4355124..
Primary DI / UDI-DI
04056869001913
510(k) Number
FDA product code
KPS
GMDN term
Multi-hole nuclear medicine system collimator, low-energy
Device class
Class II
Regulation number
892.1200
GUDID distribution status
In Commercial Distribution

Similar devices

Other devices filed under FDA product code KPS (System, tomography, computed, emission).

Other devices from Siemens Medical Solutions USA, Inc.

See all devices from Siemens Medical Solutions USA, Inc. →

Properties

  • Serial number
Other properties (14, all answered No)