Is this your brand? Sign in to claim ownership.

AESCULAP, INC.

Last updated September 17, 2026

Information

Country: US
Address: 3773 CORPORATE PKWY., CENTER VALLEY, PA, 18034
Website: bbraun.com
LinkedIn: —
Facebook: —
Email: [email protected]
Phone: +1(800)282-9000
PRRC Contact: —
EUDAMED SRN: —
FDA FEI Number: 2916714
DUNS Number: 082594540

Catalogue (15470)

Page 17 of 310

Device	Model / Reference	Registries	Class	Status
Arcadius® Xp C	SO748P	FDA UDI	Class II	Active
Arcadius® Xp L	SO857P	FDA UDI	Class II	Active
Columbus® REVISION F	NR144M	FDA UDI	Class II	Active
Aesculap	BH135US	FDA UDI	Class I	Active
Ennovate C	SQ260TS	FDA UDI	Class II	Active
Columbus	NQ387R	FDA UDI	Class I	Active
Excia® L	NC431T	FDA UDI	Class II	Unknown
Aesculap	MB639R	FDA UDI	Class I	Active
Aesculap	BH111US	FDA UDI	Class I	Active
Aesculap	EK060R	FDA UDI	Class II	Active
As	NR183Z	FDA UDI	Class II	Active
Ennovate	SZ236R	FDA UDI	Class I	Unknown
Biolox® Option	NK636	FDA UDI	Class II	Active
Aesculap	NG966R	FDA UDI	Class I	Active
Ennovate	SZ225R	FDA UDI	Class I	Active
Aesculap	FF687R	FDA UDI	Class I	Active
Aesculap	MG915R	FDA UDI	Class I	Active
Aesculap	MA362R	FDA UDI	Class I	Active
Atraumata	FB743R	FDA UDI	Class I	Active
Craniofix® Absorbable	FF017	FDA UDI	Class II	Active
Aesculap	FK919R	FDA UDI	Class I	Active
Cespace® Xp	SO270P	FDA UDI	Class II	Active
Atraumata	FB460R	FDA UDI	Class I	Active
Orthopilot Tha	FS940R	FDA UDI	Class I	Active
Aesculap	SW114T	FDA UDI	Class II	Active
Aesculap	GK765R	FDA UDI	Class I	Active
S4 Spinal System	SW689T	FDA UDI	Class II	Active
Cespace	FJ365R	FDA UDI	Class I	Active
Aesculap	PL663R	FDA UDI	Class I	Active
Aesculap	FT786T	FDA UDI	Class II	Active
Aesculap	EJ804P	FDA UDI	Class II	Active
Aesculap	FE664K	FDA UDI	Class II	Active
Columbus® REVISION F	NR650M	FDA UDI	Class II	Active
Aesculap	FE859K	FDA UDI	Class II	Unknown
Aesculap	MA019R	FDA UDI	Class I	Active
Aesculap	MD630R	FDA UDI	Class I	Active
Aesculap	BM015ZR	FDA UDI	Class I	Active
Progav 2.0	FX676T	FDA UDI	Class II	Active
Aesculap	FL166R	FDA UDI	Class I	Active
Aesculap	FB160R	FDA UDI	Class I	Active
Aesculap	EJ756R	FDA UDI	Class II	Unknown
Aesculap	BJ114R	FDA UDI	Class I	Active
Elan 4	MD745	FDA UDI	Class I	Active
Aesculap	FD399R	FDA UDI	Class I	Active
Aesculap	FO800R	FDA UDI	Class I	Active
Aesculap	BH139R	FDA UDI	Class I	Active
Aesculap	EK134SU	FDA UDI	Class II	Active
Aesculap	PO366R	FDA UDI	Class II	Active
Aesculap	ET308R	FDA UDI	Class I	Active
Aesculap	EA114R	FDA UDI	Class I	Active

Related Companies

Authorised Representatives

No authorised representatives on record.

Importers

Not available yet.

Notified Bodies

Not available yet.

Authorities

Not available yet.

FDA Recalls (44)

Recalls reported by this firm to the FDA. Listed at company level — FDA recall records don't identify a specific catalogue device.

Date	Recall No.	Class	Status	Reason
Jan 15, 2026	Z-1485-2026	—	open, classified	There is the potential for the length of the trocar shaft to be too long.
Sep 24, 2025	Z-0311-2026	—	open, classified	It was determined there is the potential of silicone fragments detaching from the yellow sealing component.
Sep 24, 2025	Z-0310-2026	—	open, classified	It was determined there is the potential of silicone fragments detaching from the yellow sealing component.
Sep 24, 2025	Z-0309-2026	—	open, classified	It was determined there is the potential of silicone fragments detaching from the yellow sealing component.
Sep 24, 2025	Z-0312-2026	—	open, classified	It was determined there is the potential of silicone fragments detaching from the yellow sealing component.
Jan 31, 2025	Z-1308-2025	—	open, classified	The forceps have been used in ways not covered by the design resulting in breakage of the clamps.
Jan 31, 2025	Z-1309-2025	—	open, classified	The forceps have been used in ways not covered by the design resulting in breakage of the clamps.
Jan 31, 2025	Z-1310-2025	—	open, classified	The forceps have been used in ways not covered by the design resulting in breakage of the clamps.
Jan 31, 2025	Z-1312-2025	—	open, classified	The forceps have been used in ways not covered by the design resulting in breakage of the clamps.
Jan 31, 2025	Z-1311-2025	—	open, classified	The forceps have been used in ways not covered by the design resulting in breakage of the clamps.
May 13, 2024	Z-2139-2024	—	open, classified	Possibility of the robotic arm to drop more than 10cm from its original position after pressing the emergency stop button due to failure of the integrated safety mechanism.
Jan 9, 2024	Z-1246-2024	—	open, classified	The sterile blister packaging may be damaged, and sterility may be compromised.
Jan 9, 2024	Z-1244-2024	—	open, classified	The sterile blister packaging may be damaged, and sterility may be compromised.
Jan 9, 2024	Z-1245-2024	—	open, classified	The sterile blister packaging may be damaged, and sterility may be compromised.
Jan 9, 2024	Z-1247-2024	—	open, classified	The sterile blister packaging may be damaged, and sterility may be compromised.
Jan 9, 2024	Z-1243-2024	—	open, classified	The sterile blister packaging may be damaged, and sterility may be compromised.
Dec 29, 2023	Z-0866-2024	—	open, classified	Needle Holder MB215R was inadvertently distributed as MB362R. Similarly, MB362R was distributed as MB215R during the affected distribution date range. The issue may lead to a short delay in procedure.
Dec 29, 2023	Z-0867-2024	—	open, classified	Needle Holder MB215R was inadvertently distributed as MB362R. Similarly, MB362R was distributed as MB215R during the affected distribution date range. The issue may lead to a short delay in procedure.
Nov 30, 2015	Z-1043-2016	—	terminated	Aesculap Inc. US has initiated a recall on Tibial and Femur extension sterile pressfit stem implant packaging that are used for Columbus Revision/Enduro Knee Implants because it is labeled as Cementless. US product is indicated in the US for use with Bone Cement only.
Nov 17, 2015	Z-0566-2016	—	terminated	AAG received a customer complaint that corrosion had been found by a hospitals central sterile service department on the ball joint of an FC424R blade. Investigation revealed that the corrosion was due to incorrect material used in the manufacturing of the disk spring of the ball joint by the supplier
Nov 10, 2015	Z-0448-2016	—	terminated	The flexible shaft of the instruments may break during orthopedic spinal surgery. There is a risk of a delay in surgery or that a fragment from the shaft could be left in a patient.
Nov 10, 2015	Z-0424-2016	—	terminated	The flexible shaft of the instruments may break during orthopedic spinal surgery. There is a risk of a delay in surgery or that a fragment from the shaft could be left in a patient.
Nov 10, 2015	Z-0423-2016	—	terminated	The flexible shaft of the instruments may break during orthopedic spinal surgery. There is a risk of a delay in surgery or that a fragment from the shaft could be left in a patient.
Nov 10, 2015	Z-0422-2016	—	terminated	The flexible shaft of the instruments may break during orthopedic spinal surgery. There is a risk of a delay in surgery or that a fragment from the shaft could be left in a patient.
Jul 7, 2015	Z-2326-2015	—	terminated	A FW103R torque wrench that was improperly reassembled after reprocessing caused a screw to break during implantation due to too much torque. The firm did not include instructions for reassembly after reprocessing.
Dec 17, 2014	Z-1012-2015	—	terminated	Some Miethke Shunt System accessories may have an incorrect MR safety symbol on the shelf box label. The label should have NO symbol but instead is marked with the MR conditional symbol. The product is MR unsafe. This information is only required to be in the Instructions for Use (IFU).
Nov 11, 2014	Z-0814-2015	—	terminated	Aesculap Inc. (AIC (USA)) initiated a recall of Miethke Shunt System accessories due to missing patients' labels for the miniNAV (FV660T). There are no patient injuries resulting from this issue.
Oct 24, 2014	Z-0502-2015	—	terminated	Aesculap Inc. (AIC (USA)) initiated a recall of Miethke Shunt System, Dual Switch Valve, due to incorrect product labeling on three units. The incorrect product labeling was the wrong expiration date, 2024-09, on the inner labeling of the sterile bag. However, the expiration date on the outer box was correct. No patient injuries were reported as a result of this issue.
Jun 13, 2014	Z-2024-2014	—	terminated	Aesculap Inc. (AIC (USA)) has initiated a voluntary recall of Dafilon Black 10/0 (0.2) 15 cm DRm4 non-sterile non-absorbable polyamide Surgical Suture due to a labeling issue. Box labels do state non-sterile; however there is an additional label that is affixed on the box that states the product is sterile.
Apr 21, 2014	Z-1676-2014	—	terminated	AIC (USA) received information regarding 3 complaints in which the deflector did not move freely on the ventricular catheter.
Dec 23, 2013	Z-0989-2014	—	terminated	The accuracy is out of specification for the Aesculap proSA Adjustment Disc Size L.
Dec 9, 2013	Z-0623-2014	—	terminated	Certain lots of the Aesculap Hi Line XXS handpiece (part # GB790R) were recalled due to a possible failure of the handpiece.
Sep 20, 2013	Z-0361-2014	—	terminated	The trial insertion instrument may disassemble during use due to a potentially weak weld on then trial inserter shaft block area located near the thumb wheel.
Sep 19, 2013	Z-0492-2014	—	terminated	The Columbus Revision CoCr 15 mm distal and posterior implant spacers, sizes F5-F7, were not compatible.
Sep 10, 2013	Z-0479-2014	—	terminated	Complaints were received for the GN161 Bipolar Foot Control reporting that the bipolar energy did not stop after release of the foot control.
Jul 16, 2013	Z-0031-2014	—	terminated	Changes were implemented to the UNITRAC instructions for use to ensure safe use and potentially extend the life of the product. This included recommending the use of Sterile Cover JG901 and new Quick Release Coupling RT02OR to eliminate the need to sterilize the UNITRAC and a functional check was added prior to use to ensure optimal functionality of the UNITRAC system.
Jun 18, 2013	Z-1806-2013	—	terminated	Aesculap Implant Systems, LLC initiated a recall of the Aesculap Prospace PEEK 5 degree Implant - 8 x 8.5 x 22 mm (SN038P) because the device is incorrectly etched with an 8 degree lordosis instead of a 5 degree lordosis. The device is labeled correctly, only the etching of the implant may be incorrect.
Jan 18, 2013	Z-0887-2013	—	terminated	The bipolar energy did not stop after release of the foot pedal.
Jun 4, 2012	Z-0805-2013	—	terminated	The deflector may not move freely on the ventricular catheter. The deflector comes pre-positioned at the 5 cm mark on the catheter. In some cases the surgeon will want to adjust the deflector to a different location on the catheter before placing it in the ventricle. There is a small percentage of cases where aggressively attempting to adjust the deflector has a potential to cause the catheter
May 9, 2012	Z-0082-2013	—	terminated	The manufacturer informed the recalling firm of a potential laser marking error in size identification on two Columbus 4-IN-1 Femoral Cutting Guide Instruments. The guides are correctly dimensioned, but the laser markings have been incorrectly etched.
Jul 19, 2011	Z-3014-2011	—	terminated	Aesculap Implant Systems received a notification from the manufacturer, Aesculap, AG of a fractured CoCr neck adapter.
Nov 22, 2010	Z-1474-2011	—	terminated	Potential safety issue in that the control box can misinterpret the information sent from the low speed motor if the control magnet inside the motor changes its posthion.
Nov 1, 2007	Z-0709-2008	—	terminated	Breakage: the inner rod of the applier may corrode and break
Nov 1, 2007	Z-0708-2008	—	terminated	Breakage: the inner rod of the applier may corrode and break